MP5991
16V, 50A, 1mΩ RDS(ON)
,
Hot-Swap Intelli-Fuse Solution
DESCRIPTION
FEATURES
The MP5991 is an integrated, monolithic
controller and switch with a power MOSFET
and other circuitry that allows it to work in
standalone operation or to be controlled via a
hot-swap controller. The device can drive up to
50A of continuous output current (IOUT) per
device at room temperature, and up to 60A of
continuous IOUT with air flow.
•
4V to 16V Operating Input Voltage (VIN)
Range
Up to 50A Continuous Output Current (IOUT
Up to 60A Continuous IOUT with Air Flow
Integrated Power MOSFET with 1mΩ RDS(ON)
IMON Reporting (±1% Accuracy)
Built-In MOSFET Driver
3.3V LDO Output
Integrated Current Sense with Sense
Output
Configurable Over-Current Limit
Configurable Short-Circuit Current Limit
Built-In Insertion Delay
Configurable Soft Start (SS)
Output Short-Circuit Protection (SCP)
Over-Temperature Protection (OTP)
Built-In Fuse Health Reporting
Fault Signal Output (GOK)
•
•
•
•
•
•
•
)
The device limits the backplane voltage drop by
limiting the inrush current to the load while a
circuit card is inserted into a live backplane
power source. It limits the internal MOSFET
current (IFET) by controlling the gate voltage
(VGATE) via the current limit (ILIMIT) reference
input and soft-start ramp.
•
•
•
•
•
•
•
•
•
•
The MP5991 provides many features to simplify
system design, such as an integrated current
mirror to monitor IOUT and the integrated on-die
temperature sense. This eliminates the need for
an external current-sense power resistor, power
MOSFET, and temperature-sense device.
Fault Type Indication (FLT_TYPE)
Supports Parallel Operation for High-
Current Applications
•
•
Integrated Intelli-Fuse Temperature Sense
Available in an LGA-32 (5mmx5mm)
Package
The IC detects the power MOSFET’s gate,
source, and drain short conditions. It also
provides feedback to the hot-swap controller via
the fault-reporting output (GOK). The MP5991
can operate in parallel for high-current
applications. During start-up, all of the devices
in parallel actively share current.
APPLICATIONS
•
•
•
•
•
Hot Swap
PC Cards
Disk Drives
Servers
The MP5991 is available in an LGA-32
(5mmx5mm) package.
Networking
All MPS parts are lead-free, halogen-free, and adhere to the RoHS
directive. For MPS green status, please visit the MPS website under
Quality Assurance. “MPS”, the MPS logo, and “Simple, Easy Solutions” are
registered trademarks of Monolithic Power Systems, Inc. or its subsidiaries.
MP5991 Rev. 1.0
4/27/2022
MonolithicPower.com
MPS Proprietary Information. Patent Protected. Unauthorized Photocopy and Duplication Prohibited.
© 2022 MPS. All Rights Reserved.
1