LOW-OHM CHIP RESISTORS, 0.1W TO 3W
RESISTORSꢀCAPACITOR
S
ꢀ
COILSꢀDELAY LINES
Term.W is
RoHS
compliant
& 260°C
compatible
ML SERIES
t
RoHS
T
L
W
ꢀIndustry’s widest range and lowest cost!
Values as low as 0.0005Ω, current ratings to 60 Amp
ꢀHigh power to size ratio
ꢀNon-inductive
RCD’s ML series offers cost-effective solutions for low
resistance applications and are particularly ideal for various
types of current sensing, voltage dividing, battery and pulse
circuits, including linear and switching power supplies, power
amplifiers, consumer electronics, etc. The resistance element is
thick film or metal plate, and is coated with high temperature
insulation for exceptional environmental protection.
OPTIONS
ꢀOption V: 170°C operating temperature range
ꢀOption EK: Group A screening per MIL-R-10509
ꢀOption EL: Group A & B screening per MIL-R-10509
Max.
Max.
RCD
Type
Resistance
Range
Typical TC
(ppm/°C)
Optional TC
(ppm/°C)
L
W
T
t
Wattage * Current *
(70°C)
(70°C)
0.02Ω TO 0.049Ω
0.050Ω TO 0.099Ω
0.100Ω TO1.0Ω
0.01Ω TO 0.049Ω
0.050Ω TO 0.099Ω
0.100Ω TO1.0Ω
0.01Ω TO 0.049Ω
0.050Ω TO 0.099Ω
0.100Ω TO1.0Ω
400
300
200
400
300
200
400
300
200
400
300
200
400
300
200
400
300
200
350
200
200, 100
200, 100
100
200, 100
200, 100
100
200, 100
200, 100
100
ML0402
0.1W
3A
.040 ± .004 .020 ± .004 .014 ± .004 .010 ± .004
[1.00 ± .1] [.5 ± .1] [.35 ± .1] [.25 ± .1]
ML0603 0.125W
ML0805 0.25W
3.5A
5A
.061 ± .005 .031 ± .004 .016 ±. 006 .012 ± .008
[1.55 ± .12] [.8 ± .1] [.40 ± .15] [.3 ± .2]
.079 ± .008 .050 ± .008 .020 ± .006 .024 ± .008
[2.0 ± 0.2] [1.25 ± 0.2] [0.5 ± .15] [0.6 ± 0.2]
0.01Ω TO 0.049Ω
0.050Ω TO 0.099Ω
0.100Ω TO1.0Ω
200, 100
200, 100
100
ML1206
ML2010
ML2512
0.5W
1W
7A
.126 ± .008 .063 ± .008 .020 ± .006 .030 ± .018
[3.2 ± 0.2] [1.6 ± 0.2] [0.5 ± .15] [0.76 ± .46]
0.01Ω TO 0.049Ω
0.050Ω TO 0.099Ω
0.100Ω TO1.0Ω
200, 100
200, 100
100
14A
20A
.197 ± .008 .098 ± .008 .020 ± .006 .032 ± .020
[5.0 ± 0.2] [2.5 ± 0.2] [0.5 ± .15] [0.8 ± 0.5]
0.01Ω TO 0.049Ω
0.050Ω TO 0.099Ω
0.100Ω TO1.0Ω
200, 100
200, 100
100
2W
.250 ± 0.01 .126 ± .012 .024 ± .008 .040 ± .020
[6.35 ± 0.25] [3.2 ± 0.3]
[0.6 ± .2]
[1 ± 0.5]
0.0005Ω
0.00075Ω, 0.001Ω,
0.0015Ω, 0.002Ω
200, 100
100, 50
.250 ± 0.01 .126 ± .012 .020~.063** .040~.106**
[6.35 ± 0.25] [3.2 ± 0.3] [0.5 ~ 1.6] [1.0 ~ 2.7]
MLB2512 2W/ 3W *
60A
0.0025Ω TO 0.01Ω
150
100, 50
* In order to operate at maximum wattage and current ratings, a suitable substrate or PCB design is required to carry the current and drain the heat. Heavy Cu, large
pads and traces, and/or multilayer PC boards are recommended. MLB2512 has a 3W rating when used with 300mm2 x .0056 Cu pads
** Varies with resistance value (lower values typically have thicker bodies and wider termination pads for increased current carrying capability)
TYPICAL PERFORMANCE CHARACTERISTICS
P/N DESIGNATION:
ML2010
- R01 - J T
W
Characteristics
Thermal Shock (-55° to +155°C)
Short Time Overload (2x [PxR]1/2, 5 sec.)
Low Temp. Operation (-55°C)
High Temp. Exposure (125°C, 100 hrs.)
Resistance to Solder Heat
Moisture Resistance
∆ R
RCD Type
±1%
±2%
Options: V, EK, EL (leave blank if standard)
Resis. Code: for 1% tol. use R as decimal point and 3
digits, e.g. R100= 0.1Ω, R200=.2Ω; for 2%-10% use R
and 2 digits , e.g. R10= 0.1Ω, R20= .2Ω, etc. except if
necessary, use additional (significant) digits, e.g. R005 for
0.005Ω, R0075 for 0.0075Ω in any tolerance
±1%
±1%
±0.5%
±1%
Tolerance Code: F=1%, G=2%, J=5%
Load Life(1000 hrs.)
±2%
Operating Temperature Range
Derating of Wattage & Current
Solderability
-55 to +155°C
1.177%/°C above 70°C
95% Min. Coverage
15 Grams Min.
Packaging: B=Bulk, T=Tape & Reel
Optional TC: 50=50ppm, 101=100ppm, 201-200ppm
Termination: W= Lead-free, Q= Tin/Lead (leave blank if
either is acceptable)
Terminal Adhesion
-
-
-
-
RCD Components Inc, 520 E.Industrial Park Dr, Manchester, NH, USA 03109 rcdcomponents.com Tel: 603 669 0054 Fax: 603 669 5455 Email:sales@rcdcomponents.com
FA009C Sale of this product is in accordance with GF-061. Specifications subject to change without notice.
24