MIC2101/02
38V, Synchronous Buck Controllers
Featuring Adaptive On-Time Control
Hyper Speed Control¥ Family
Features
General Description
x Hyper Speed Control architecture enables:
ꢀ High Delta V operation (VIN = 38V and VOUT = 1.2V)
ꢀ Any Capacitor¥ stable
The
Micrel
MIC2101/02
are
constant-frequency,
synchronous buck controllers featuring a unique adaptive
ON-time control architecture. The MIC2101/02 operates
over an input supply range from 4.5V to 38V and can be
used to supply up to 15A of output current. The output
voltage is adjustable down to 0.8V with a guaranteed
accuracy of ±1%. The device operates with programmable
switching frequency from 200kHz to 600kHz.
x 4.5V to 38V input voltage
x Adjustable output voltage from 0.8 V to 24V (also limited
by duty cycle)
x 200kHz to 600kHz, programmable switching frequency
x Hyper Light Load Control (MIC2101)
x Hyper Speed Control (MIC2102)
x Enable input and Power Good output
x Built-in 5V regulator for single-supply operation
Micrel’s Hyper Light Load™ architecture provides the same
high-efficiency and ultra-fast transient response as the Hyper
Speed Control architecture under the medium to heavy loads,
but also maintains high efficiency under light load conditions
by transitioning to variable frequency, discontinuous-mode
operation.
x Programmable current limit and fold-back “hiccup” mode
short-circuit protection
The MIC2101/02 offers a full suite of protection features to
ensure protection of the IC during fault conditions. These
include under-voltage lockout to ensure proper operation
under power-sag conditions, internal soft-start to reduce
inrush current, fold-back current limit, “hiccup” mode short-
circuit protection and thermal shutdown.
x 5ms internal soft-start, internal compensation, and
thermal shutdown
x Supports safe start-up into a pre-biased output
x –40qC to +125qC junction temperature range
x Available in 16-pin 3mm x 3mm QFN package
All support documentation can be found on Micrel’s web
site at: www.micrel.com.
Applications
x Distributed power systems
x Networking/telecom Infrastructure
x Printers, scanners, graphic cards, and video cards
Typical Application
MIC2101 Efficiency (VIN = 12V)
vs. Output Current (MIC2101)
100
5.0V
3.3V
90
2.5V
1.8V
80
1.5V
1.2V
1.0V
0.9V
0.8V
70
60
50
40
30
20
10
fSW = 600kHz (CCM)
0
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16
OUTPUT CURRENT (A)
MIC2101/02 Wide Input, Hyper Light Load Buck Converter
Hyper Speed Control, Hyper Light Load, and Any Capacitor are trademarks of Micrel, Inc.
Micrel Inc. • 2180 Fortune Drive • San Jose, CA 95131 • USA • tel +1 (408) 944-0800 • fax + 1 (408) 474-1000 • http://www.micrel.com
Revision 2.0
November 13, 2013