Surface Mount Reed Switches
Low Power > MDSM-DT
MDSM-DT 14.7mm Surface Mount Changeover Reed Switch
RoHS
Description
The MDSM-DT Reed Switch is a miniature, surface mounting, changeover switch
with a 14.73mm long x 2.54mm diameter (0.580” x 0.100”) glass envelope. It is
capable of switching 175Vdc at 5W. The MDSM-DT has an insulation resistance
of 109 ohms minimum and contact resistance less than 100 milli-ohms. This reed
switch is a surface mount version of the MDRR-DT.
Features
• Surface mount SPDT
changeover switch
• Available sensitivity 15-30 AT
• Capable of switching 175Vdc or
0.25A at up to 5W
Agency Approvals
Benefits
• Zero operating power required for
contact closure
• Excellent for switching
microcontroller logic level loads
• Hermetically sealed switch
contacts are not affected by and
have no effect on their external
environment
Agency
Agency File Number
Ampere-Turns Range
E47258
E471070
15-30 AT
15-30 AT
DEMKO 14 ATEX 1393U
Applications
• Position Sensing
• Level Sensing
• Office Equipments
• Mobile Phones
Dimensions
• Industrial Controls
Dimensions in mm (inch)
2.54 0.38
(.100 .015ꢀ
Ø0.56
(.022ꢀ
Switch Type
COMMON
LEAD
14.73
Ø2.54
(.100ꢀMAX
(.580ꢀMAX
N.O.
N.C.
Contact Form
C (SPDT-CO)
Ø0.51
(.020ꢀ
CL OF OVERLAP
Body: Glass
Leads: Tin-plated Ni-Fe wire
10.67 0.51
(.420 .020ꢀ
Materials
Ø0.56
(.022ꢀ
Note: SPDT-CO = Single-Pole, Double-Throw, Change-Over
RECOMMENDED LAND PATTERN
0.025
(.001ꢀMIN
2.87
(.113ꢀMAX
19.30
(.760ꢀ
3.50
(.138ꢀTYP
20.32 0.25
(.800 .010ꢀ
25.40 0.25
(1.000 .010ꢀ
1.60
(.063ꢀTYP
0.51
(.020ꢀ
0.94
(.037ꢀ
Note: Land pattern is Littelfuse recommendation only. User is responsible for proper PCB design.
Electrical Ratings
Contact Rating 1
W/VA - max.
5
Switching 2
Vdc - max.
Vac - max.
Vdc - min.
Adc - max.
Aac - max.
Adc - max.
175
120
200
0.25
0.18
1.50
Voltage 3
Breakdown 4
Switching 2
Current 3
Carry
Ω - max.
0.100
Resistance
Capacitance
Temperature
Contact, Initial Insulation
Ω - min.
109
Contact
Operating
Storage 5
pF - typ.
1.0
-40 to +125
-65 to +125
°C
°C
Notes:
1. Contact rating - Product of the switching voltage and current should never exceed the wattage rating. Contact Littelfuse for additional load/life information.
2. When switching inductive and/or capacitive loads, the effects of transient voltages and/or currents should be considered. Refer to Application Notes AN108A and AN107 for details.
3. Electrical Load Life Expectancy - Contact Littelfuse with voltage, current values along with type of load.
4. Breakdown Voltage - per MIL-STD-202, Method 301.
5. Storage Temperature - Long time exposure at elevated temperature may degrade solderability of the leads.
© 2015 Littelfuse
littelfuse.com
Specifications are subject to change without notice.