MCP2502X/5X
CAN I/O Expander Family
Features
Description
• Implements CAN V2.0B
The MCP2502X/5X devices operate as I/O expanders
for
a Controller Area Network (CAN) system,
- Programmable bit rate up to 1 Mb/s
- One programmable mask
- Two programmable filters
- Three auto-transmit buffers
- Two message reception buffers
supporting CAN V2.0B active, with bus rates up to
1 Mb/s. The MCP2502X/5X allows a simple CAN node
to be implemented without the need for
microcontroller.
a
The devices are identical, with the following
exceptions:
- Does not require synchronization or
configuration messages
• Hardware Features
One Wire
- Non-volatile memory for user configuration
Device
A/D
Digital
CANbus
- User configuration automatically loaded on
power-up
MCP25020
MCP25025
MCP25050
MCP25055
No
No
No
Yes
No
- Eight general-purpose I/O lines individually
selectable as inputs or outputs
Yes
Yes
- Individually selectable transmit-on-pin-
change for each input
Yes
The MCP2502X/5X devices feature a number of
peripherals, including digital I/Os, four-channel 10-bit
A/D (MCP2505X) and PWM outputs with automatic
message transmission on change-of-input state. This
includes an analog input exceeding a preset threshold.
- Four 10-bit, analog input channels with
programmable conversion clock and VREF
sources (MCP2505X devices only)
- Message scheduling capability
- Two 10-bit PWM outputs with independently
programmable frequencies
One mask and two acceptance filters are provided to
give maximum flexibility during system design with
respect to identifiers that the device will respond to.
The device can also be configured to automatically
transmit a unique message whenever any of several
error conditions occur.
- Device configuration can be modified via
CAN bus messages
- In-Circuit Serial Programming™ (ICSP™) of
default configuration memory
- Optional 1-wire CAN bus operation
• Low-power CMOS technology
- Operates from 2.7V to 5.5V
The device is pre-programmed in non-volatile memory
so that the part defaults to a specific configuration at
power-up.
- 10 mA active current, typical
- 30 µA standby current (CAN Sleep mode)
• 14-pin PDIP (300 mil) and SOIC (150 mil)
packages
• Available temperature ranges:
- Industrial (I): -40°C to +85°C
- Extended (E): -40°C to +125°C
© 2007 Microchip Technology Inc.
DS21664D-page 1