Freescale Semiconductor, Inc.
SEMICONDUCTOR TECHNICAL DATA
Order this document
by MCM64Z836/D
MCM64Z836
MCM64Z918
Product Preview
256K x 36 and 512K x 18 Bit
ZBT Fast Static RAM
The ZBT RAM is an 8M–bit synchronous fast static RAM designed to provide
Zero Bus Turnaround . The ZBT RAM allows 100% use of bus cycles during
back–to–back read/write and write/read cycles. The MCM64Z836 (organized as
256K words by 36 bits) and the MCM64Z918 (organized as 512K words by 18
bits) are fabricated in Motorola’s high performance silicon gate CMOS tech-
nology. This device integrates input registers, an output register, a 2–bit address
counter, and high speed SRAM onto a single monolithic circuit for reduced parts
count in communication applications. Synchronous design allows precise cycle
control with the use of an external positive–edge–triggered clock (CK). CMOS
circuitry reduces the overall power consumption of the integrated functions for
greater reliability.
TQ PACKAGE
TQFP
CASE 983A–01
ZP PACKAGE
PBGA
CASE 999–02
Addresses (SA), data inputs (DQ), and all control signals except output enable
(G) and linear burst order (LBO) are clock (CK) controlled through positive–
edge–triggered noninverting registers.
Write cycles are internally self–timed and are initiated by the rising edge of the
clock (CK) input. This feature eliminates complex off–chip write pulse generation
and provides increased timing flexibility for incoming signals. Write data is
supplied to the memory one cycle after the write sequence initiation for the flow–
throughdevice, andtwocyclesafterthewritesequenceinitiationforthepipelined
device.
For flow–through read cycles, the SRAM allows output data to simply flow freely from the memory
array. For pipelined read cycles, the SRAM output data is temporarily stored by an edge–triggered
output register and then released to the output buffers at the next rising edge of clock (CK).
The MCM64Z836 and MCM64Z918 operate from a 2.5 V core power supply and all outputs oper-
ate on a 2.5 V power supply. All inputs and outputs are JEDEC Standard JESD8–5 compatible.
•
•
2.5 V ±200 mV Core Power Supply, 2.5 V I/O Supply
MCM64Z836/918–7 = 7 ns Flow–Through Access/2.6 ns Pipelined Access (225 MHz)
MCM64Z836/918–8 = 8 ns Flow–Through Access/3 ns Pipelined Access (200 MHz)
MCM64Z836/918–8.5 = 8.5 ns Flow–Through Access/3.5 ns Pipelined Access (166 MHz)
Selectable Read/Write Functionality (Flow–Through/Pipelined)
Selectable Burst Sequencing Order (Linear/Interleaved)
Internally Self–Timed Write Cycle
Two–Cycle Deselect (Pipelined)
Byte Write Control
ADV Controlled Burst
Simplified JTAG
•
•
•
•
•
•
•
•
100–Pin TQFP and 119–Bump PBGA Packages
ZBT and Zero Bus Turnaround are trademarks of Integrated Device Technology, Inc., and the architecture is supported by
Micron Technology, Inc. and Motorola, Inc.
This document contains information on a new product under development. Motorola reserves the right to change or discontinue this product without notice.
REV 3
9/1/99
Motorola, Inc. 1999
MOTOROLA FAST SRAM
MCM64Z836•MCM64Z918
For More Information On This Product,
Go to: www.freescale.com
1