Click here for production status of specific part numbers.
MAX77813
5.5V Input, 2A, High-Efficiency
Buck-Boost Converter
General Description
Features and Benefits
The MAX77813 is a high-efficiency step-up/step-down
(buck-boost) converter targeted for single-cell Li+/Li-ion
battery powered applications. The device maintains a
regulated output voltage from 2.6V to 5.14V across an
input voltage range of 2.3V to 5.5V. The device supports
up to 2A of output current in boost mode and up to 3A in
buck mode.
● V Range: 2.30V to 5.5V
IN
● V
Range: 2.60V to 5.14V
OUT
2
(I C Programmable in 20mV Steps)
● Up to 2A Output Current in Boost Mode
(V = 3.0V, V
= 3.4V, ILIM = High)
IN
OUT
● Up to 3A Output Current in Buck Mode (ILIM = High)
● Up to 97% Peak Efficiency
The device seamlessly transitions between buck and
boost modes. A unique control algorithm allows high-
efficiency, outstanding load, and line transient response.
● SKIP Mode for Optimal Light Load Efficiency
● 55µA (Typ) Low Quiescent Current
Dedicated enable and power-OK pins allow simple hard-
2
● 3.4MHz High Speed I C Serial Interface
2
ware control. An I C serial interface is optionally used for
● Input Current Limit Selection Pin
● Power-OK Output
dynamic voltage scaling, system power optimization, and
fault read-back. The device supports two inductor current
limit options selected by the ILIM pin.
● 2.5MHz Switching Frequency
The MAX77813 is available in a 20-bump, 1.83mm x
2.13mm wafer-level package (WLP).
● Protection Features
• Soft-Start
• Thermal Shutdown
• Overvoltage Protection
• Overcurrent Protection
Applications
● Single-Cell Li+/Li-ion Battery Powered Devices
● Handheld Scanners, Mobile Payment Terminals,
Security Cameras
● 1.827mm x 2.127mm, 20-Bump WLP
● AR/VR Headsets
Ordering Information appears at end of data sheet.
Typical Application Circuit
1μH
BOOST TO BUCK
LINE TRANSIENT RESPONSE
LX1
MAX77813
LX2
IOUT = 1.5A
DC INPUT
2.3V TO 5.5V
IN
V
OUT
V
OUT
VOUT = 3.3V
3.4V
2.6V TO 5.14V
2A (BOOST MODE)
3A (BUCK MODE)
10μF
SYS
47μF
2.9V
OUTS
PGND
1μF
500mV/div
20mV/div
V
IN
BOOST
MODE
BOOST
MODE
BUCK MODE
V
IO
SERIAL
HOST
SDA
SCL
EN
V
OUT
POWER-OK
POK
ILIM
CURRENT LIMIT
SELECT
ENABLE
100µs/div
HIGH-EFFICIENCY BUCK-BOOST CONVERTER
2
WITH OPTIONAL I C CONTROL IN TINY 20-BUMP WLP
19-8238; Rev 2; 3/19