EVALUATION KIT AVAILABLE
Click here for production status of specific part numbers.
MAX77860
USB Type-C, 3A Switch-Mode Buck Charger
with Integrated CC Detection, Reverse Boost,
and ADC
General Description
Benefits and Features
The MAX77860 is a high-performance single input switch
mode charger that features USB Type-C CC detection ca-
pability in addition to reverse boost capability and a Safe-
out LDO.
● Single-Cell Switch Mode Charger
• Up to 14V Protection
• 4.0V to 13.5V Input Operating Range
• Switching Charger with D+/D- Charger Detection
• Up to 4.0A Input Current Limit with Adaptive Input
Current Limit (AICL)
• Up to 3.15A Battery Charging Current Limit
• Optional External Sense Resistor
• CC, CV, and Die Temperature Control
• Supports USB-OTG Reverse Boost, up to 1.5A
Current Limit
This switched-mode battery charger with two integrated
switches, provides small inductor and capacitor sizes, pro-
grammable battery charging current, and is ideally suited
for portable devices such as smartphones, IoT devices,
and other Li-ion battery powered electronics. The charger
features a single input, which works for both USB and high
voltage adapters. It supports USB Type-C CC detection
under BC 1.2 specification, and the power-path switch is
integrated in the chip. All MAX77860 blocks connected to
the adapter/USB pin are protected from input overvoltage
events up to 14V. The USB-OTG output provides true-
load disconnect and is protected by an adjustable output
current limit. It has an input current limit up to 4.0A and
can charge a single-cell battery up to 3.15A. When config-
ured in reverse-boost mode, the IC requires no additional
inductors to power USB-OTG accessories. The switching
charger is designed with a special CC, CV, and die tem-
• Master-Slave Charging Capability, up to 6A Charge
Current
• Integrated Battery True-Disconnect FET
• Rated up to 9A
, Discharge Current Limit
RMS
(Programmable)
● USB Type-C Detection
• Integrated V
• CC Pin
Switch
CONN
• D+/D- Detection for USB HVDCP
• BC 1.2 Support
2
perature regulation algorithm, as well as I C programma-
● One Safeout LDO
ble settings to accommodate a wide range of battery sizes
and system loads. The on-chip ADC can help monitor the
charging input voltage/current, battery voltage, charging/
discharging current, and the battery temperature.
2
● I C-Compatible Interface
Ordering Information appears at end of data sheet.
2
The MAX77860 communicates through an I C 3.0 com-
patible serial interface consisting of a bidirectional serial
data line (SDA) and a serial clock line (SCL). The IC is
available in a 3.9mm x 4.0mm, 81-bump (9 x 9 array),
0.4mm pitch, wafer-level package (WLP).
Applications
● USB Type-C Charging for 1S Li-ion Applications
● Mobile Point-of-Sale Devices
● Portable Medical Equipment
● Portable Industrial Equipment
19-100290; Rev 2; 6/19