EVALUATION KIT AVAILABLE
MAX11200/MAX11210
24-Bit, Single-Channel, Ultra-Low-Power,
Delta-Sigma ADCs with GPIO
General Description
Benefits and Features
● Minimize Power Consumption with Ultra-Low Power
The MAX11200/MAX11210 are ultra-low-power (< 300FA
active current), high-resolution, serial output ADCs. These
devices provide the highest resolution per unit power in
the industry, and are optimized for applications that
require very high dynamic range with low power, such as
sensors on a 4mA to 20mA industrial control loop. Optional
input buffers provide isolation of the signal inputs from the
switched capacitor sampling network allowing these con-
verters to be used with high-impedance sources without
compromising available dynamic range or linearity. The
devices provide a high-accuracy internal oscillator that
requires no external components. When used with the
specified data rates, the internal digital filter provides
more than 100dB rejection of 50Hz or 60Hz line noise.
The devices are configurable using the SPI interface and
are available in a 16-pin QSOP package.
Dissipation
• Operating-Mode Current Drain < 300µA (max)
• Sleep-Mode Current Drain < 0.4µA
● Improve Measurement Quality with Excellent DC/AC
Accuracy
• 24.0-Bit ENOB at 5sps
20.9-Bit Noise-Free Resolution at 10sps
19-Bit Noise-Free Resolution at 120sps
• 570nV
Noise at 10sps, ±3.6VFS Input
RMS
• 1ppm INL (typ), 10ppm (max) and No Missing Codes
● Lower System Cost with Integrated Functionality
• Programmable Gain (1 to 16) (MAX11210)
• Four SPI-Controlled GPIOs for External Mux Control
• Optional Input Buffers on Both Signal and
Reference Inputs
• > 100dB (min) 50Hz/60Hz Rejection
Applications
● Increase System Accuracy with Built-In Self Calibration
• On-Demand Offset and Gain Self-Calibration and
System Calibration
Sensor Measurement (Temperature and Pressure)
Portable Instrumentation
Battery Applications
• User-Programmable Offset and Gain Registers
Weigh Scales
● Increase System Robustness and Reliability with
±2kV ESD Protection
● 2.7V to 3.6V Analog Supply Range
QSPI is a trademark of Motorola, Inc.
● 1.7V to 3.6V Digital and I/O Supply Range
● -40°C to 85°C Operating Temperature Range
MICROWIRE is a registered trademark of National
Semiconductor Corp.
µMAX is a registered trademark of Maxim Integrated Products, Inc.
Functional Diagram
AVDD
CLOCK GENERATOR
CLK
TIMING
DVDD
GND
AINP
CS
SCLK
DIN
DIGITAL LOGIC
AND SERIAL-
INTERFACE
PROGRAMMABLE
GAIN*
DIGITAL FILTER
(SINC )
4
AINN
(1–16)
CONTROLLER
RDY/DOUT
3RD-ORDER
DELTA-SIGMA
MODULATOR
GPIO1
GPIO2
GPIO3
GPIO4
REFP
REFN
GPIO
MAX11200
MAX11210
*PROGRAMMABLE GAIN ONLY AVAILABLE ON THE MAX11210.
19-5332; Rev 2; 12/14