5秒后页面跳转
LX8384-33IDT PDF预览

LX8384-33IDT

更新时间: 2024-09-16 20:23:51
品牌 Logo 应用领域
美高森美 - MICROSEMI 输出元件调节器
页数 文件大小 规格书
11页 138K
描述
Fixed Positive LDO Regulator, 3.3V, 1.5V Dropout, PSSO2, ROHS COMPLIANT, PLASTIC, TO-252, DPAK-2/3

LX8384-33IDT 技术参数

是否无铅: 含铅是否Rohs认证: 符合
生命周期:Active零件包装代码:TO-252
包装说明:ROHS COMPLIANT, PLASTIC, TO-252, DPAK-2/3针数:3
Reach Compliance Code:compliantECCN代码:EAR99
HTS代码:8542.39.00.01风险等级:5.65
最大回动电压 1:1.5 V最大输入电压:10 V
最小输入电压:4.75 VJESD-30 代码:R-PSSO-G2
JESD-609代码:e3长度:6.54 mm
湿度敏感等级:1功能数量:1
端子数量:2工作温度TJ-Max:150 °C
最大输出电流 1:5 A最大输出电压 1:3.365 V
最小输出电压 1:3.235 V标称输出电压 1:3.3 V
封装主体材料:PLASTIC/EPOXY封装代码:TO-252
封装形状:RECTANGULAR封装形式:SMALL OUTLINE
峰值回流温度(摄氏度):260认证状态:Not Qualified
调节器类型:FIXED POSITIVE SINGLE OUTPUT LDO REGULATOR座面最大高度:2.42 mm
表面贴装:YES端子面层:MATTE TIN
端子形式:GULL WING端子节距:2.29 mm
端子位置:SINGLE处于峰值回流温度下的最长时间:40
宽度:6.1 mmBase Number Matches:1

LX8384-33IDT 数据手册

 浏览型号LX8384-33IDT的Datasheet PDF文件第2页浏览型号LX8384-33IDT的Datasheet PDF文件第3页浏览型号LX8384-33IDT的Datasheet PDF文件第4页浏览型号LX8384-33IDT的Datasheet PDF文件第5页浏览型号LX8384-33IDT的Datasheet PDF文件第6页浏览型号LX8384-33IDT的Datasheet PDF文件第7页 
LX8384x-xx  
ꢁꢂꢃꢁꢂꢁꢄꢅꢆ  
5A Low Dropout Positive Regulators  
A
M I C R O S E M I  
C O M P A N Y  
PRODUCTION  
available and specified in the Available  
Options table below.  
Three-Terminal Adjustable Or  
Fixed Output  
Guaranteed < 1.3V Headroom a  
5A (LX8384A)  
Guaranteed 2.0% Max.  
Reference Tolerance (LX8384A)  
Guaranteed 1.0% Max.  
Reference Tolerance (LX8384B)  
0.015% Line Regulation  
0.15% Load Regulation  
The LX8384/84A/84B Series ICs are  
positive regulators designed to provide 5A  
output current. These regulators yield  
higher efficiency than currently available  
devices with all internal circuitry designed  
to operate down to a 1V input-to-output  
differential. In each of these products, the  
dropout voltage is fully specified as a  
function of load current. Dropout is  
guaranteed at a maximum of 1.3V (8384A)  
and 1.5V (8384) at maximum output  
current, decreasing at lower load currents.  
In addition, on-chip trimming adjusts the  
reference voltage tolerance to 1% maximum  
at room temperature and 2% maximum over  
the 0 to 125°C range for the LX8384A,  
making this ideal for the Pentium P54C-  
VRE specification. The LX8384B offers  
0.8% tolerance at room temperature and  
1.0% maximum over line, load and  
The LX8384/84A/84B Series devices are  
pin-compatible with earlier 3-terminal  
regulators, such as the 117 series products,  
but they do require input and output  
capacitors. A minimum 10µF capacitor is  
required on the input and a 15µF or greater  
on the output of these new devices for  
stability. Although, these capacitors are  
generally included in most regulator  
designs.  
The LX8384/84A/84B Series quiescent  
current flows into the load, thereby  
increasing efficiency. This feature contrasts  
with PNP regulators where up to 10% of the  
output current is wasted as quiescent  
current. The LX8384-xxI is specified over  
the industrial temperature range of -25°C to  
125°C, while the LX8384-xxC/84A-  
xxC/84B-xxC is specified over the  
commercial range of 0°C to 125°C.  
Mcrosemi  
.
Pentium® Processor VRE  
Application  
High Efficiency Linear  
Regulators  
Power Regulators For Switching  
Power Supplies  
Battery Chargers  
temperature.  
Fixed versions are also  
Constant Current Regulators  
Cyrix® 6x86™  
AMD-K5™  
IMPORTANT: For the most current data, consult MICROSEMI’s website: http://www.microsemi.com  
IN  
OUT  
3.5V  
5V  
LX8384A  
at 5A  
+
LX8384/84A/84B-00  
LX8384/84A/84B-15  
LX8384/84A/84B-33  
Adjustable  
1.5V  
121  
*1500µF  
0.1%  
6MV1500GX  
Sanyo  
ADJ  
+
1500µF  
5x 6MV1500GX  
Sanyo  
3.3V  
218  
0.1%  
Table 1  
- Available Options  
* Capacitors must have < 20m  
Total ESR for the VRE Specification  
An Application of the LX8384A for the Pentium P54C Processors Meeting VRE Specification.  
Max Ref Max Dropout  
Plastic TO-220 Plastic TO-263  
DD  
3-Pin 3-Pin  
Plastic TO-252  
(D-Pak) 3-Pin  
TA (°C)  
DT  
P
Accuracy  
Voltage  
0 to 125  
2.0%  
2.0%  
1.0%  
1.5V  
1.3V  
1.3V  
1.5V  
LX8384-xxCDT  
LX8384A-xxCDT  
LX8384B-xxCDT  
LX8384-xxIDT  
LX8384-xxCP  
LX8384-xxCDD  
LX8384A-xxCDD  
LX8384B-xxCDD  
LX8384-xxIDD  
LX8384A-xxCP  
LX8384B-xxCP  
LX8384-xxIP  
-25 to 125 2.0%  
Note: Available in Tape & Reel.  
Append the letter “T” to the part number. (i.e. LX8384-xxCPT)  
Copyright 2000  
Rev. 2.1d, 2001-03-15  
Microsemi  
Page 1  
Linfinity Microelectronics Division  
11861 Western Avenue, Garden Grove, CA. 92841, 714-898-8121, Fax: 714-893-2570  

与LX8384-33IDT相关器件

型号 品牌 获取价格 描述 数据表
LX8384-33IDTT ETC

获取价格

Analog IC
LX8384-33IP MICROSEMI

获取价格

5A LOW DROPOUT POSITIVE REGULATORS
LX8384-33IP-TR MICROSEMI

获取价格

暂无描述
LX838484A84B-00 MICROSEMI

获取价格

5A Low Dropout Positive Regulators
LX838484A84B-15 MICROSEMI

获取价格

5A Low Dropout Positive Regulators
LX838484A84B-33 MICROSEMI

获取价格

5A Low Dropout Positive Regulators
LX8384A-00 MICROSEMI

获取价格

5A LOW DROPOUT POSITIVE REGULATORS
LX8384A-00CDD MICROSEMI

获取价格

5A LOW DROPOUT POSITIVE REGULATORS
LX8384A-00CDDT MICROSEMI

获取价格

Adjustable Positive LDO Regulator, 1.2V Min, 8V Max, 1.3V Dropout, BIPolar, PSSO3, PLASTIC
LX8384A-00CDD-TR MICROSEMI

获取价格

Regulator, 1 Output, BIPolar,