Ordering number : ENA1609
Bi-CMOS IC
For Camera Modules
LV8483CS
Composite Channel Lens Driver
Overview
LV8483CS is a constant current driver IC for voice coil motors (VCM) that includes a constant current 1.5-channel driver.
It uses an ultraminiature wafer level package (WLP), which makes the IC ideal for VCM motor, shutter (SH), and iris (IR)
drivers used in a wide variety of portable equipment including camera cell phones.
Functions
• Constant current driver for AF VCM + constant current 1.5-channel H-bridge driver for SH and IR
• I2C bus interface
• Low power consumption achieved using MOS process technologies
• Built-in 4-bit DAC for constant current operation (used for SH and IR H-bridges)
• Built-in 10-bit DAC for constant current control (used for AF VCM driver)
• Built-in constant current detection resistance
• Wafer level package. WLP10 (0.97mm × 2.47mm × 0.5mmt)
• Built-in thermal shutdown circuit and LVS circuit.
• AF VCM overshoot prevention function (current slope function)
• Built-in SH/IR control pin (energization timing control function using trigger input)
Specifications
Absolute Maximum Ratings at Ta = 25°C
Parameter
Maximum supply voltage
Output applied voltage
Input applied voltage
Symbol
Conditions
Ratings
Unit
V
V
V
V
max
5.0
5.0
CC
max
OUT1, OUT2, OUT3, OUT4
ENA, SCL, SDA, SH/IRTR
Per channel
V
OUT
max
-0.3 to +5.0
400
V
IN
GND pin flow-out current
Allowable power dissipation
Operating temperature
Storage temperature
IGND
mA
mW
°C
°C
Pd max
Topr
With specified substrate *
550
-30 to +85
-40 to +150
Tstg
* Specified substrate : 50mm × 50mm × 1.6mm, glass epoxy 2-layer board
Any and all SANYO Semiconductor Co.,Ltd. products described or contained herein are, with regard to
"standard application", intended for the use as general electronics equipment (home appliances, AV equipment,
communication device, office equipment, industrial equipment etc.). The products mentioned herein shall not be
intended for use for any "special application" (medical equipment whose purpose is to sustain life, aerospace
instrument, nuclear control device, burning appliances, transportation machine, traffic signal system, safety
equipment etc.) that shall require extremely high level of reliability and can directly threaten human lives in case
of failure or malfunction of the product or may cause harm to human bodies, nor shall they grant any guarantee
thereof. If you should intend to use our products for applications outside the standard applications of our
customer who is considering such use and/or outside the scope of our intended standard applications, please
consult with us prior to the intended use. If there is no consultation or inquiry before the intended use, our
customer shall be solely responsible for the use.
Specifications of any and all SANYO Semiconductor Co.,Ltd. products described or contained herein stipulate
the performance, characteristics, and functions of the described products in the independent state, and are not
guarantees of the performance, characteristics, and functions of the described products as mounted in the
customer's products or equipment. To verify symptoms and states that cannot be evaluated in an independent
device, the customer should always evaluate and test devices mounted in the customer
's products or
equipment.
31710 SY PC 20091013-S00004 No.A1609-1/9