High Power Chip Resistors
<Wide Terminal type>
LTR50 (5025 size : 1W)
Features
1) Improved welding strength
The structure of longer electrodes provides the wider welding area than the chip resistors with normal electrodes, and this
enhanced the solder welding strength.
2) Increased surge-resistance
This is achieved by Rohm’s original trimming technology plus resistive element patterning.
3) High-power tolerance
Two times of the rated power is guaranteed than the normal-electrode resistors.
4) ROHM resistors are ISO-9001 & ISO/TS16949 certified.
Applications
Automotive, industrial and power supply.
Ratings
Design and specifications are subject to change without notice. Carefully check the specification sheet before using or ordering
it.
Item
Conditions
Specifications
1W
Rated power
Power must be derated according to the power derating curve in
at 70°C
Figure 1 when ambient temperature exceeds 70°C.
100
80
60
40
20
0
−55
0
70
100
155
AMBIENT TEMPERATURE (°C)
Fig.1
Rated voltage
The voltage rating is calculated by the following equation.
If the value obtained exceeds the limiting element voltage,
the voltage rating is equal to the maximum operating voltage.
E: Rated voltage (V)
P: Rated power (W)
E= P×R
R: Nominal resistance (Ω)
Limiting element voltage
200V
Nominal resistance
See Table 1.
Operating temperature
−55°C to + 155°C
D( 0.5%) F( 1%) J( 5%)
Table 1
Resistance range
Resistance temperature coefficient
Resistance tolerance
(Ω)
(ppm/°C)
D
F
J
( 0.5%)
( 1%)
100
100
200
10 to 130k (E24)
1 to 1M (E24)
( 5%)
www.rohm.com
2010.09 - Rev.F
1/3
c
○ 2010 ROHM Co., Ltd. All rights reserved.