Surge Protection Module
LED Lighting Surge Protection Module > LSP10
ꢀꢁꢂS
LSP10 Module Series
Description
The Littelfuse LSP10 thermally protected Surge Protective
Device is a self-protected device which is specially designed
to be used in outdoor and commercial LED lighting fixtures
for transient overvoltage protection. It is constructed with
Littelfuse thermally protected varistor technology. Its built-in
thermal disconnect function provides additional protection
to prevent catastrophic failure and fire hazard even under
the extreme circumstances of varistor end-of-life or sustain-
ing over voltage conditions. LSP10 series connected option
allows clear indication of thermal fault protection by discon-
necting power to luminaire thereby signally SPD module
replacement. The LSP10 SPD facilitates customer’s product
compliance to IEEE C62.41.2 Location Category C High and
US Dept of Energy MSSLC Model Spec.
Agency Approvals
Features
Agency
Standard
Agency File Number
• IP66 rated, dust-tight
and water resistant
• IEC61643-11 Class
II/ EN61643-11Type
2 Compliant1
• 20kA Maximum
Discharge Current
(Imax)m 8/20us
UL1449
E320116
• Meets ANSI C82.77-5-
2015: Location C High
Applications
• Meets ANSI C136.2-
2015: Extreme Level
• 240Vac and 277Vac parts
are available for Class I
and Class II installation
based on IEC luminaire
protection classes.
• Outdoor and Commercial • Wash wall lighting
• Meets IEEE C62.41.2:
LED Lighting
• Parking garage/lot lighting
• Flood lighting
• Tunnel lighting
Location Category C High
• Roadway lighting
• Traffic lighting
• Digital signage
• Meets US Dept.
of Energy MSSLC
Model Spec.
Please see details in Part
Numbering System.
• Street lighting
• CE Mark - Meets the
requirements of Low
Voltage and RoHS
• Parallel or Series
connected options
Additional Information
• Thermally protected
European Directives.
Notes:
1. Self-declared compliance.
Datasheet
ꢀeꢁourceꢁ
Sꢀꢁꢂleꢃ
Absolute Maximum Ratings
• For ratings of individual members of a series, see Device Ratings and Specifications chart
LSP10 Series
150 to 510
Units
Continous:
AC Voltage Range (VM(AC)RMS
)
V
A
Continuous Current*
5
Transient:
Maximum Discharge Current 8/20μs Waveform (Imax)
Nominal Discharge Current 8/20µs Waveform (In)
20,000
10,000
A
A
Operating Ambient Temperature Range (TA)
Storage Temperature Range (TSTG
-45 to +85
-45 to +110
600
°C
°C
V
)
Isolation Voltage Capability (When the thermal disconnect opens)
Insulation Resistance
>1,000
MΩ
Note: * = Max. continuous current for series connection.
CAUTION: Stresses above those listed in "Absolute Maximum Ratings" may cause permanent damage to the device. This is a stress only rating and operation of the device at these or any
other conditions above those indicated in the operational sections of this specification is not implied.
© 2016 Littelfuse, Inc.
Specifications are subject to change without notice.
5
Revised: 11/11/16