LSM2-T/30-D12 Series
DOSA-SMT, 30A POL DC/DC Converters
Typical unit
FEATURES
DESCRIPTION
Today’s high performance CPU and programma-
ble logic devices demand superior performance
from their power source. The LSM2-T/30-D12
series DC/DC converters offer up to 30 Amps
continuous output power with a user-selectable
output of 0.8 to 3.6 Volts. 25 Amps output is
available up to 5.0 Vo u t . This tiny converter is
ideal for distributed bus architectures (DBA) and
intermediate power busses with an input range
of 6 to 14 Volts DC. The pinout, trim system and
include no additional external components
required, stable no-load operation, up to 10,000
µF output load capacitance and no reverse
conduction.
System functions offer a remote On/Off con-
trol, two additional ground pins (optional) and a
load Sense input. Agency certifications include
UL/EN 60950-1, CAN/CSA-C22.2 60950-1, IEC
60950-1, and FCC emissions characterization.
The automated surface mount assembly is fully
nꢀNon-isolated Point-of-Load (POL) converter,
ideal for distributed bus applications
nꢀOptimized for CPUs, DSPs and program-
mable logic - FPGAs, ASICs
nꢀ30 Amps maximum output current
nꢀUser-selectable output voltage, 0.8Vdc to
5.0Vdc via trim resistor or voltage input
nꢀWide input range 6Vdc to 14Vdc (Vo u t <3.6V)
nꢀSelectable phased start-up sequencing and
mechanical footprint is compatible with the DOSA RoHS (Reduction of Hazardous Substances)
tracking
(www.dosapower.com) industry standard.
lead-free construction and attachment. The
LSM2-T/30-D12 mounts to its host carrier
board via reflow-soldered PCB pads.
The extraordinary efficiency means low heat
and freedom from expensive, bulky heat sinks. A
wealth of protection features include input under-
voltage shutdown, output overcurrent current lim-
iting, short circuit protection and overtemperature
shutdown/recycle.
To ensure very high performance of powered
logic systems, the LSM2-T/30-D12 features low
output noise, high slew rates (20 Amps/µSec.),
fast transient response (25 µSec settling) and
tight line and load regulation. Many logic devices
require controlled start up and tracking capabili-
ties. The LSM2-T/30-D12 includes a Sequence/
Track function and prebias protection against
external startup voltages. Other DBA features
nꢀExcellent efficiency over output voltage range
nꢀTwo models available, with or without addi-
tional ground/thermal pads
nꢀFast settling, high di/dt slew rate, low
output noise
nꢀExtensive self protection plus 'hiccup' short
circuit auto recovery
nꢀDesigned for full safety and emission certification
SIMPLIFIED SCHEMATIC
+OUTPUT
+INPUT
Additional
ground/thermal
pads
+SENSE
*
COMMON
COMMON
VCC
CURRENT
SENSE
PWM
CONTROLLER
ON/OFF
CONTROL
REFERENCE &
ERROR AMP
V
TRACK/
V
OUT
SEQUENCE
INPUT
TRIM
Typical topology is shown.
*One phase of two is shown.
Pb
For full details go to
www.murata-ps.com/rohs
Lead-free
construction/attach
www.murata-ps.com
Technical enquiries email: sales@murata-ps.com, tel: +1 508 339 3000
MDC_LSM2_T30_D12 Series.B11 Page 1 of 12