DOSA-SMT, 30A POL DC/DC Converters
Typical unit
FEATURES
DESCRIPTION
Today’s high performance CPU and programma-
ble logic devices demand superior performance
from their power source. The LSM2-T/30-D12
series DC/DC converters offer up to 30 Amps
continuous output power with a user-selectable
output of 0.8 to 3.6 Volts. 25 Amps output is
available up to 5.0 VOUT. This tiny converter is
ideal for distributed bus architectures (DBA) and
intermediate power busses with an input range
of 6 to 14 Volts DC. The pinout, trim system and
include no additional external components
required, stable no-load operation, up to 10,000
μF output load capacitance and no reverse
conduction.
System functions offer a remote On/Off con-
trol, two additional ground pins (optional) and a
load Sense input. Agency certifications include
UL/EN 60950-1, CAN/CSA-C22.2 60950-1, IEC
60950-1, and FCC emissions characterization.
The automated surface mount assembly is fully
ꢀ Non-isolated Point-of-Load (POL) converter,
ideal for distributed bus applications
ꢀ Optimized for CPUs, DSPs and program-
mable logic - FPGAs, ASICs
ꢀ 30 Amps maximum output current
ꢀ User-selectable output voltage, 0.8Vdc to
5.0Vdc via trim resistor or voltage input
ꢀ Wide input range 6Vdc to 14Vdc (VOUT <3.6V)
ꢀ Selectable phased start-up sequencing and
mechanical footprint is compatible with the DOSA RoHS (Reduction of Hazardous Substances)
tracking
(www.dosapower.com) industry standard.
lead-free construction and attachment. The
LSM2-T/30-D12 mounts to its host carrier
board via reflow-soldered PCB pads.
The extraordinary efficiency means low heat
and freedom from expensive, bulky heat sinks. A
wealth of protection features include input under-
voltage shutdown, output overcurrent current lim-
iting, short circuit protection and overtemperature
shutdown/recycle.
To ensure very high performance of powered
logic systems, the LSM2-T/30-D12 features low
output noise, high slew rates (20 Amps/μSec.),
fast transient response (25 μSec settling) and
tight line and load regulation. Many logic devices
require controlled start up and tracking capabili-
ties. The LSM2-T/30-D12 includes a Sequence/
Track function and prebias protection against
external startup voltages. Other DBA features
ꢀ Excellent efficiency over output voltage range
ꢀ Two models available, with or without addi-
tional ground/thermal pads
ꢀ Fast settling, high di/dt slew rate, low
output noise
ꢀ Extensive self protection plus 'hiccup' short
circuit auto recovery
ꢀ Designed for full safety and emission certification
SIMPLIFIED SCHEMATIC
+OUTPUT
+INPUT
Additional
ground/thermal
pads
+SENSE
*
COMMON
COMMON
VCC
CURRENT
SENSE
PWM
CONTROLLER
ON/OFF
CONTROL
REFERENCE &
ERROR AMP
V
TRACK/
V
OUT
SEQUENCE
INPUT
TRIM
Typical topology is shown.
*One phase of two is shown.
Pb
For full details go to
www.murata-ps.com/rohs
Lead-free
construction/attach
www.murata-ps.com
Technical enquiries email: sales@murata-ps.com, tel: +1 508 339 3000
MDC_LSM2_T30_D12 Series.B12 Page 1 of 12