LQN D12 Models
www.murata-ps.com
Non-Isolated, Single Output, 12VIN, 0.8-5VOUT
45-50 Amp, ¼-Brick, DC/DC Converters
FEATURES
ꢀ
3-phase buck regulators for new
distributed 12V power architectures
ꢀ
12V input (10.2-13.8V range)
ꢀ
0.8/1/1.2/1.5/1.8/2/2.5/3.3/5VOUT
@45-50A
OBSOLETE PRODUCT
ꢀ
Non-isolated, fixed-frequency,
synchronous-rectifier topology
ꢀ
¼-brick size, through hole or SMT
Typical unit
ꢀ
1% setpoint accuracy
ꢀ
Efficiencies to 93.5% @ 45 Amps
Noise as low as 20mVp-p
ꢀ
Stable no-load operation
PRODUCT OVERVIEW
ꢀ
On/Off control, trim & sense functions
The LQN D12 Series of non-isolated quarter bricks
are ideal building blocks for emerging, on-board
power-distribution schemes in which isolated 12V
buses deliver power to any number of non-isolated,
step-down buck regulators. LQN D12 DC/DCs
accept a 12V input (10.2V to 13.8V input range)
and convert it, with the highest efficiency in the
smallest space, to a 0.8, 1, 1.2, 1.5, 1.8, 2, 2.5, 3.3
or 5 Volt output fully rated at 45-50 Amps.
LQN D12s are ideal POLPPs (point-of-use/load
power processors) and they typically require no ex-
ternal components. They occupy the standard quarter
brick board space (1.45" x 2.3") and come in either
through-hole packages or surface-mount packages
with a profile of only 0.4" (0.5" including heatsink).
The LQNs best-in-class power density is
high efficiency (95% for 5VOUT models), low noise
(20mVp-p typ.), tight line/load regulation ( 0.25%
max.), quick step response (70μsec), stable no-
load operation, and no output reverse conduction.
The fully functional LQN's feature input over/
undervoltage lockout, output overvoltage and
overcurrent detection, continuous short-circuit
protection, overtemperature protection, an
output-voltage trim function, a remote on/off
control pin, and sense pin. High efficiency enables
the LQN D12s to deliver rated output currents
of 50 Amps at high ambient temperatures and
minimal air flow.
ꢀ
Output overvoltage protection
ꢀ
Input Over/Undervoltage lockout
ꢀ
Thermal shutdown
ꢀ
Designed to meet UL/IEC/EN60950-1
ꢀ
EMC compliant
If your new system boards call for multiple
supply voltages, check out the economics of
on-board 12V distributed power. If you don't need
to pay for multiple isolation barriers, MPS's non-
isolated LQN D12 brick's will save you money.
achieved with a fully synchronous, fixed-frequency,
3-phase buck topology that delivers extremely
ꢀ/54054
ꢁꢋꢌꢍꢃ
ꢀ).054
ꢁꢂꢃ
ꢀ3%.3%
ꢁꢄꢎꢃ
).054
#/--/.
ꢁꢄꢃ
/54054
#/--/.
ꢁꢏꢌ ꢐꢃ
#522%.4
3%.3%
6##
ꢅꢆ0(!3%
07-
/.ꢈ/&&
#/.42/,
ꢁꢉꢃ
2%&%2%.#% ꢇ
%22/2 !-0
#/.42/,,%2
6/54
42)-
ꢁꢊꢃ
Typical topology is shown.
➀ Only one phase of three shown.
Figure 1. Simplified Schematic
For full details go to
www.murata-ps.com/rohs
www.murata-ps.com
email: sales@murata-ps.com
2009.09.14 MDC_LQN D12 Models.B04 Page 1 of 15