5秒后页面跳转
LPC2290 PDF预览

LPC2290

更新时间: 2024-10-25 22:46:59
品牌 Logo 应用领域
恩智浦 - NXP 存储微控制器
页数 文件大小 规格书
41页 179K
描述
16/32-bit ARM microcontrollers with CAN, 10-bit ADC and external memory interface

LPC2290 数据手册

 浏览型号LPC2290的Datasheet PDF文件第2页浏览型号LPC2290的Datasheet PDF文件第3页浏览型号LPC2290的Datasheet PDF文件第4页浏览型号LPC2290的Datasheet PDF文件第5页浏览型号LPC2290的Datasheet PDF文件第6页浏览型号LPC2290的Datasheet PDF文件第7页 
LPC2290  
16/32-bit ARM microcontrollers  
with CAN, 10-bit ADC and external memory interface  
Rev. 01 — 09 February 2004  
Preliminary data  
1. General description  
The LPC2290 is based on a 16/32 bit ARM7TDMI-S™ CPU with real-time emulation  
and embedded trace support. For critical code size applications, the alternative 16-bit  
Thumb Mode reduces code by more than 30% with minimal performance penalty.  
With its 144 pin package, low power consumption, various 32-bit timers, 8-channel  
10-bit ADC, 2 advanced CAN channels, PWM channels and up to 9 external interrupt  
pins this microcontroller is particularly suitable for automotive and industrial control  
applications as well as medical systems and fault-tolerant maintenance buses.  
LPC2290 provides up to 76 GPIO depending on bus configuration. With a wide range  
of additional serial communications interfaces, it is also suited for communication  
gateways and protocol converters as well as many other general-purpose  
applications.  
2. Features  
2.1 Key features  
16/32-bit ARM7TDMI-S microcontroller in a LQFP144 package.  
16 kB on-chip Static RAM.  
Serial boot-loader using UART0 provides in-system download and programming  
capabilities.  
EmbeddedICE-RT and Embedded Trace interfaces offer real-time debugging with  
the on-chip RealMonitor software as well as high speed real-time tracing of  
instruction execution.  
Two interconnected CAN interfaces with advanced acceptance filters. Additional  
serial interfaces include two UARTs (16C550), Fast I2C (400 kbits/s) and two  
SPIs™.  
Eight channel 10-bit A/D converter with conversion time as low as 2.44 µs.  
Two 32-bit timers (with 4 capture and 4 compare channels), PWM unit (6 outputs),  
Real Time Clock and Watchdog.  
Vectored Interrupt Controller with configurable priorities and vector addresses.  
Configurable external memory interface with up to four banks, each up to 16 Mb  
and 8/16/32 bit data width.  
Up to 76 general purpose I/O pins (5 V tolerant). Up to 9 edge/level sensitive  
external interrupt pins available.  

与LPC2290相关器件

型号 品牌 获取价格 描述 数据表
LPC2290FBD144 NXP

获取价格

16/32-bit ARM microcontrollers with CAN, 10-bit ADC and external memory interface
LPC2290FBD144/01 NXP

获取价格

16/32-bit ARM microcontroller with CAN, 10-bit ADC and external memory interface
LPC2290FBD144/01,5 NXP

获取价格

LPC2290 - 16/32-bit ARM microcontroller with CAN, 10-bit ADC and external memory interface
LPC2292 NXP

获取价格

16/32-bit ARM microcontrollers 256 kB ISP/IAP Flash with CAN, 10-bit ADC and external memo
LPC2292_07 NXP

获取价格

16/32-bit ARM microcontrollers; 256 kB ISP/IAP flash with CAN, 10-bit ADC and external mem
LPC2292FBD144 NXP

获取价格

16/32-bit ARM microcontrollers 256 kB ISP/IAP Flash with CAN, 10-bit ADC and external memo
LPC2292FBD144,551 NXP

获取价格

LPC2292FBD144
LPC2292FBD144/00 NXP

获取价格

16/32-bit ARM microcontrollers; 256 kB ISP/IAP flash with CAN, 10-bit ADC and external mem
LPC2292FBD144/01 NXP

获取价格

16/32-bit ARM microcontrollers; 256 kB ISP/IAP flash with CAN, 10-bit ADC and external mem
LPC2292FBD144/01,5 NXP

获取价格

LPC2292/2294 - 16/32-bit ARM microcontrollers; 256 kB ISP/IAP flash with CAN, 10-bit ADC a