5秒后页面跳转
LP3852EMP-3.3 PDF预览

LP3852EMP-3.3

更新时间: 2024-09-16 02:58:35
品牌 Logo 应用领域
德州仪器 - TI PC光电二极管输出元件调节器
页数 文件大小 规格书
32页 2698K
描述
1.5-A Fast Response Ultra-Low Dropout Linear Regulators

LP3852EMP-3.3 技术参数

生命周期:Not Recommended零件包装代码:SOT-223
包装说明:SOP, SOT-223-4针数:5
Reach Compliance Code:not_compliantECCN代码:EAR99
HTS代码:8542.39.00.01风险等级:5.11
Samacsys Confidence:Samacsys Status:Released
Samacsys PartID:590054Samacsys Pin Count:5
Samacsys Part Category:Integrated CircuitSamacsys Package Category:Other
Samacsys Footprint Name:SOT150P696X180-5NSamacsys Released Date:2017-01-11 19:09:53
Is Samacsys:N可调性:FIXED
最大回动电压 1:0.435 V标称回动电压 1:0.24 V
最大绝对输入电压:7.5 V最大输入电压:7 V
最小输入电压:3.735 VJESD-30 代码:R-PDSO-G5
JESD-609代码:e0长度:6.5 mm
湿度敏感等级:1功能数量:1
输出次数:1端子数量:5
工作温度TJ-Max:125 °C工作温度TJ-Min:-40 °C
最高工作温度:125 °C最低工作温度:-40 °C
最大输出电流 1:1.5 A最大输出电压 1:3.399 V
最小输出电压 1:3.201 V标称输出电压 1:3.3 V
封装主体材料:PLASTIC/EPOXY封装代码:SOP
封装等效代码:SOT-223-4封装形状:RECTANGULAR
封装形式:SMALL OUTLINE包装方法:TR
峰值回流温度(摄氏度):260认证状态:Not Qualified
调节器类型:FIXED POSITIVE SINGLE OUTPUT LDO REGULATOR座面最大高度:1.8 mm
子类别:Other Regulators表面贴装:YES
技术:CMOS端子面层:Tin/Lead (Sn/Pb)
端子形式:GULL WING端子节距:1.5 mm
端子位置:DUAL处于峰值回流温度下的最长时间:NOT SPECIFIED
最大电压容差:3%宽度:3.56 mm
Base Number Matches:1

LP3852EMP-3.3 数据手册

 浏览型号LP3852EMP-3.3的Datasheet PDF文件第2页浏览型号LP3852EMP-3.3的Datasheet PDF文件第3页浏览型号LP3852EMP-3.3的Datasheet PDF文件第4页浏览型号LP3852EMP-3.3的Datasheet PDF文件第5页浏览型号LP3852EMP-3.3的Datasheet PDF文件第6页浏览型号LP3852EMP-3.3的Datasheet PDF文件第7页 
Sample &  
Buy  
Support &  
Community  
Product  
Folder  
Tools &  
Software  
Technical  
Documents  
LP3852, LP3855  
SNVS174I FEBRUARY 2003REVISED FEBRUARY 2015  
LP385x 1.5-A Fast Response Ultra-Low Dropout Linear Regulators  
1 Features  
3 Description  
The LP3852 and LP3855 series of fast ultra-low  
1
Input Supply Voltage: 2.5 V to 7 V  
Ultra-Low Dropout Voltage  
dropout linear regulators operate from a 2.5-V to 7-V  
input supply. A wide range of preset output voltage  
options are available. These ultra-low dropout linear  
regulators respond very quickly to step changes in  
load, which makes them suitable for low voltage  
microprocessor applications. The LP3852 and  
LP3855 are developed on a CMOS process which  
allows low quiescent-current operation independent  
of output load current, typically 4 mA at 1.5-A load  
current. This CMOS process also allows the LP3852  
and LP3855 to operate under extremely low dropout  
conditions, typically 24 mV at 150-mA load current  
and 240 mV at 1.5-A load current.  
Stable with Selected Ceramic Capacitors  
Low Ground-Pin Current  
Load Regulation of 0.06%  
10-nA Quiescent Current in Shutdown Mode  
Specified Output Current of 1.5 A DC  
Output Voltage Accuracy ± 1.5%  
ERROR Pin Indicates Output Status  
SENSE Option Improves Load Regulation  
Overtemperature/Overcurrent Protection  
40°C to 125°C Junction Temperature Range  
The LP3852 has an ERROR pin; it goes low when  
the output voltage drops 10% below nominal value.  
The LP3855 has a SENSE pin to improves regulation  
at remote loads.  
2 Applications  
Microprocessor Power Supplies  
GTL, GTL+, BTL, and SSTL Bus Terminators  
Power Supplies for DSPs  
SCSI Terminator  
The LP3852 and LP3855 are available with fixed  
output voltages from 1.8 V to 5 V with a specified  
accuracy of ±1.5% at room temperature, and ±3%  
over all conditions (varying line, load, and  
temperature). Contact Texas Instruments Sales for  
specific voltage option needs.  
Post Regulators  
High Efficiency Linear Regulators  
Battery Chargers  
Device Information(1)  
Other Battery Powered Applications  
PART NUMBER  
PACKAGE  
BODY SIZE (NOM)  
6.50 mm x 3.56 mm  
10.16 mm x 8.42 mm  
14.986 mm x 10.16 mm  
SOT (5)  
LP3852  
LP3855  
TO-263 (5)  
TO-220 (5)  
(1) For all available packages, see the orderable addendum at  
the end of the datasheet.  
4 Simplified Schematics  
V
INPUT  
3.3V ± 10%  
OUT  
IN  
OUT  
2.5V, 1.5A  
C
*
C *  
OUT  
IN  
10 PF  
LP3852-2.5  
10 PF  
SD  
ERROR  
GND  
ERROR**  
SD**  
* TANTALUM OR CERAMIC  
**SD and ERROR pins must be pulled high through a 10-kpull-up resistor. Connect the ERROR pin to ground if this  
function is not used.  
V
INPUT  
3.3V ± 10%  
OUT  
2.5V, 1.5A  
OUT  
IN  
C
*
C *  
OUT  
IN  
10 PF  
LP3855-2.5  
10 PF  
SENSE  
GND  
SD  
SD**  
* TANTALUM OR CERAMIC  
**SD must be pulled high through a 10-kpull-up resistor.  
1
An IMPORTANT NOTICE at the end of this data sheet addresses availability, warranty, changes, use in safety-critical applications,  
intellectual property matters and other important disclaimers. PRODUCTION DATA.  
 
 
 
 
 

LP3852EMP-3.3 替代型号

型号 品牌 替代类型 描述 数据表
LP3852EMPX-3.3/NOPB TI

完全替代

1.5A Fast Response Ultra Low Dropout Linear Regulators 5-SOT-223 -40 to 125
LP3852EMP-3.3/NOPB TI

类似代替

1.5-A Fast Response Ultra-Low Dropout Linear Regulators

与LP3852EMP-3.3相关器件

型号 品牌 获取价格 描述 数据表
LP3852EMP-3.3/NOPB TI

获取价格

1.5-A Fast Response Ultra-Low Dropout Linear Regulators
LP3852EMP-5.0 NSC

获取价格

1.5A Fast Response Ultra Low Dropout Linear Regulators
LP3852EMP-5.0/NOPB TI

获取价格

1.5-A Fast Response Ultra-Low Dropout Linear Regulators
LP3852EMPX-1.8 NSC

获取价格

1.5A Fast Response Ultra Low Dropout Linear Regulators
LP3852EMPX-1.8 TI

获取价格

1.8V FIXED POSITIVE LDO REGULATOR, 0.435V DROPOUT, PDSO5, SOT-223, 5 PIN
LP3852EMPX-1.8/NOPB TI

获取价格

1.5-A Fast Response Ultra-Low Dropout Linear Regulators
LP3852EMPX-2.5 TI

获取价格

2.5V FIXED POSITIVE LDO REGULATOR, 0.435V DROPOUT, PDSO5, SOT-223, 5 PIN
LP3852EMPX-2.5 NSC

获取价格

1.5A Fast Response Ultra Low Dropout Linear Regulators
LP3852EMPX-2.5/NOPB TI

获取价格

1.5A Fast Response Ultra Low Dropout Linear Regulators 5-SOT-223 -40 to 125
LP3852EMPX-2.5/NOPB NSC

获取价格

IC VREG 2.5 V FIXED POSITIVE LDO REGULATOR, 0.435 V DROPOUT, PDSO5, SOT-223, 5 PIN, Fixed