Sample &
Buy
Support &
Community
Product
Folder
Tools &
Software
Technical
Documents
LM5160A, LM5160
SNVSA03B –OCTOBER 2014–REVISED JULY 2015
LM5160A, LM5160 Wide Input 65-V, 1.5-A Synchronous Buck / Fly-Buck™ Converter
1 Features
3 Description
The LM5160 family is a 65-V, 1.5-A synchronous
step-down converter with integrated high-side and
low-side MOSFETs. The constant-on-time control
scheme requires no loop compensation and supports
high step-down ratios with fast transient response. An
internal feedback amplifier maintains ±1% output
voltage regulation over the entire operating
temperature range. The on-time varies inversely with
input voltage resulting in nearly constant switching
frequency. Peak and valley current limit circuits
protect against overload conditions. The under-
1
•
Wide 4.5-V to 65-V Input Voltage Range
Integrated High and Low Side Switches
•
–
No Schottky Diode Required
•
•
1.5-A Maximum Load Current
Constant On-Time Control
–
–
No External Loop Compensation
Fast Transient Response
•
•
•
•
•
•
•
•
•
•
•
Selectable Forced CCM or DCM Operation
CCM Option Supports Multi-Output Fly-Buck
Nearly Constant Switching Frequency
Frequency Adjustable up to 1 MHz
Programmable Soft-Start Time
voltage
independently
lockout
(EN/UVLO)
circuit
provides
adjustable
input
under-voltage
threshold and hysteresis. The LM5160 is
programmed through the FPWM pin to operate in
continuous conduction mode (CCM) from no load to
full load or to automatically switch to discontinuous
conduction mode (DCM) at light load for higher
efficiency. Forced CCM operation supports multiple
output and isolated Fly-Buck applications using a
coupled inductor.
Pre-Biased Startup
Peak Current Limiting Protection
Adjustable Input UVLO and Hysteresis
±1% Feedback Voltage Reference
LM5160A allows external VCC Bias
Thermal Shutdown Protection
The LM5160A shares the same features and pin
configuration as the LM5160. An external bias supply
can be connected to the VCC pin of the LM5160A in
either Buck or Fly-Buck applications. This additional
capability can improve efficiency at high input
voltages.
2 Applications
•
•
•
•
•
Industrial Programmable Logic Controller
IGBT Gate Drive Bias Supply
Device Information(1)
Telecom Primary/Secondary Side Bias
E-meter Power Line Communication
Low Power Isolated DC-DC (Fly-Buck)
PART NUMBER
LM5160A
PACKAGE
BODY SIZE (NOM)
WSON (12)
4.0 mm × 4.0 mm
LM5160
(1) For all available packages, see the orderable addendum at
the end of the datasheet.
Typical Fly-Buck Application Circuit
Typical Sync-Buck Application Circuit
VOUT-SEC
VIN
VIN
VIN
BST
SW
VIN
BST
LM5160A
LM5160
VOUT
SW
RON
VOUT-PRI
RON
LM5160A
LM5160
FB
EN/UVLO
EN/UVLO
FB
VCC
VCC
SS
FPWM
SS
FPWM
AGND PGND
AGND PGND
1
An IMPORTANT NOTICE at the end of this data sheet addresses availability, warranty, changes, use in safety-critical applications,
intellectual property matters and other important disclaimers. PRODUCTION DATA.