LM27213
www.ti.com
SNVS377A –FEBRUARY 2006–REVISED MARCH 2013
LM27213 Single Phase Hysteretic Buck Controller
Check for Samples: LM27213
1
FEATURES
DESCRIPTION
The LM27213 is a single-phase synchronous buck
2
•
•
•
•
•
•
•
•
•
•
•
•
•
Ideal Load and Line Transient Responses
5V to 30V Input Range
regulator controller designed to fully support
a
portable microprocessor. On-chip gate drive makes
for a compact, single chip solution. Output currents in
excess of 25 Amps are possible.
On-Chip Gate Drive
Convenient CLK_EN# Signal
Input Under-Voltage Lockout
High Light-Load Efficiency
The IC employs a current mode hysteretic control
mechanism. Inductor current is sensed through a low
value sense resistor.
Adjustable Analog Soft Start
Peak Current Limit
The LM27213 will operate over an input voltage
range of 5V to 30V. The output voltage is
programmed through 6 Voltage Identification (VID)
pins and ranges from 0.700V to 1.708V in 64 steps.
Over-Voltage Protection
Error Correction for Good Static Accuracy
±1% DAC Accuracy Over Temperature
Interfaces with the LM2647 System Supply
Available in TSSOP or WQFN Packages
Since the error in the output voltage directly sets the
inductor current, the dynamic response to a large,
fast load transient is close to a square wave. This is
optimal for mode transition requirements. Also, due to
the intrinsic input voltage feedforward characteristic of
hysteretic control, the line transient response is
excellent as well.
APPLICATIONS
•
Core Voltage Supply for Low Power
Processors
The IC provides cycle-by-cycle peak current limit,
over-voltage protection, and a power good signal.
The LM27213 fully supports the Stop CPU and Sleep
modes offered by some processors. When enabled,
the IC enters a power-saving “diode emulator” mode
which helps prolong battery runtime for portable
systems.
•
Low Voltage High Current Buck Regulators
Benefits
•
•
•
Single Chip Core Power Solution
Minimum Output Capacitance Required
Low Cost, Compact Design
The LM27213 also has a soft start feature for the
external adjustment of soft start speed.
1
Please be aware that an important notice concerning availability, standard warranty, and use in critical applications of
Texas Instruments semiconductor products and disclaimers thereto appears at the end of this data sheet.
2
All trademarks are the property of their respective owners.
PRODUCTION DATA information is current as of publication date.
Products conform to specifications per the terms of the Texas
Instruments standard warranty. Production processing does not
necessarily include testing of all parameters.
Copyright © 2006–2013, Texas Instruments Incorporated