LM27222
www.ti.com
SNVS306B –SEPTEMBER 2004–REVISED MARCH 2013
LM27222 High-Speed 4.5A Synchronous MOSFET Driver
Check for Samples: LM27222
1
FEATURES
DESCRIPTION
The LM27222 is a dual N-channel MOSFET driver
designed to drive MOSFETs in push-pull
configurations as typically used in synchronous buck
regulators. The LM27222 takes the PWM output from
a controller and provides the proper timing and drive
levels to the power stage MOSFETs. Adaptive shoot-
through protection prevents damaging and efficiency
reducing shoot-through currents, thus ensuring a
robust design capable of being used with nearly any
MOSFET. The adaptive shoot-through protection
circuitry also reduces the dead time down to as low
as 10ns, ensuring the highest operating efficiency.
The peak sourcing and sinking current for each driver
of the LM27222 is about 3A and 4.5Amps
respectively with a Vgs of 5V. System performance is
also enhanced by keeping propagation delays down
to 8ns. Efficiency is once again improved at all load
2
•
•
•
•
•
•
•
•
•
Adaptive Shoot-through Protection
10ns Dead Time
8ns Propagation Delay
30ns Minimum On-time
0.4Ω Pull-down and 0.9Ω Pull-up Drivers
4.5A Peak Driving Current
MOSFET Tolerant Design
5µA Quiescent Current
30V Maximum Input Voltage in Buck
Configuration
•
•
4V to 6.85V Operating Voltage
SOIC-8 and WSON Packages
APPLICATIONS
currents
by
supporting
synchronous,
non-
synchronous, and diode emulation modes through the
LEN pin. The minimum output pulse width realized at
the output of the MOSFETs is as low as 30ns. This
enables high operating frequencies at very high
conversion ratios in buck regulator designs. To
support low power states in notebook systems, the
LM27222 draws only 5µA from the 5V rail when the
IN and LEN inputs are low or floating.
•
High Current Buck And Boost Voltage
Converters
•
•
•
Fast Transient DC/DC Power Supplies
Single Ended Forward Output Rectification
CPU And GPU Core Voltage Regulators
Typical Application
VCC
D1
4V to 6.85V
C2
V
IN
up to 30V
Q1
R1
0.33 mF
+
U1
V
C3
C1
6
5
3
2
1
7
CB
HG
CC
(to controller)
(to controller)
L1
V
OUT
LEN
LM27222
0.5V to
Vin - 0.5V
4
8
+
Q2
IN
SW
C4
GND
LG
1
Please be aware that an important notice concerning availability, standard warranty, and use in critical applications of
Texas Instruments semiconductor products and disclaimers thereto appears at the end of this data sheet.
All trademarks are the property of their respective owners.
2
PRODUCTION DATA information is current as of publication date.
Products conform to specifications per the terms of the Texas
Instruments standard warranty. Production processing does not
necessarily include testing of all parameters.
Copyright © 2004–2013, Texas Instruments Incorporated