Ordering number : ENA0601B
Monolithic Linear IC
Fan Motor Driver
LA6581U
BTL Driver Single-Phase Full-Wave
Overview
The LA6581U is a low-saturation BTL output linear driving motor driver for single-phase bipolar fan motors. It features
quite, low power, high efficiency drive that suppresses reactive current. It is optimal for use in applications that require
miniaturization and low noise, such as CPU cooling fan motors and 5 to 12V electronic game products.
Functions
• Single-phase full-wave linear drive with BTL output (gain resistance 500Ω to 284kΩ, 55dB) : Suitable for the equipment
requiring silent operation, such as game equipment, CPU cooler, etc. because of its freedom from switching noise.
• Low-voltage operation possible, with wide operable voltage range (3 to 16V)
• Low saturation output (Upper + lower saturation voltage : V sat (total) = 0.3V typ, I = 100mA) : High coil efficiency
O
O
with low current drain. IC itself does not generate much heat.
• High impedance of Hall input pin
• FG output (rotation speed detection output : open collector output)
• Heat protection circuit : When the large current flows because of output short-circuit, raising the IC chip temperature
above 180°C, the heat protection circuit suppresses the drive current, preventing IC burn and breakdown.
• Ultraminiature package (MSOP8J : 3.0mm×4.9mm×0.85mm typ) : Small substrate while allowing larger blades.
Specifications
Maximum Ratings at Ta = 25°C
Parameter
Symbol
max
Conditions
Ratings
Unit
V
Output voltage
Output current
V
I
18
0.36
18
CC
max
max
*1
A
OUT
Output withstand voltage
FG output withstand
FG output current
V
V
I
V
OUT
max
18
V
FG
max
5
mA
FG
*1: This specifies the starting current. Tj = 150°C max must not be exceeded.
Continued on next page.
Any and all SANYO Semiconductor Co.,Ltd. products described or contained herein are, with regard to
"standard application", intended for the use as general electronics equipment (home appliances, AV equipment,
communication device, office equipment, industrial equipment etc.). The products mentioned herein shall not be
intended for use for any "special application" (medical equipment whose purpose is to sustain life, aerospace
instrument, nuclear control device, burning appliances, transportation machine, traffic signal system, safety
equipment etc.) that shall require extremely high level of reliability and can directly threaten human lives in case
of failure or malfunction of the product or may cause harm to human bodies, nor shall they grant any guarantee
thereof. If you should intend to use our products for applications outside the standard applications of our
customer who is considering such use and/or outside the scope of our intended standard applications, please
consult with us prior to the intended use. If there is no consultation or inquiry before the intended use, our
customer shall be solely responsible for the use.
Specifications of any and all SANYO Semiconductor Co.,Ltd. products described or contained herein stipulate
the performance, characteristics, and functions of the described products in the independent state, and are not
guarantees of the performance, characteristics, and functions of the described products as mounted in the
customer's products or equipment. To verify symptoms and states that cannot be evaluated in an independent
device, the customer should always evaluate and test devices mounted in the customer
's products or
equipment.
30409 MS / 53007 MS IM / 12507 MS PC 20060427-S00002 No.A0601-1/4