Ordering number : ENA0603A
Monolithic Linear IC
Fan Motor Driver
LA6587T
BTL Driver Single-Phase Full-Wave
Overview
The LA6587T is single-phase bipolar fan motor is driven, through BTL output linear drive, at high efficiency, low power,
and low sound by suppressing the reactive power. Lock protection, rotary signal (FG, 1/2FG) circuits are incorporated,
which is optimum for the notebook PC, consumer equipment power supply, car audio system, CPU cooler, etc. that require
high reliability and low noise.
Functions
• Single-phase full-wave linear drive by BTL output (gain resistance 1kΩ-360kΩ, 51dB)
: No switching noise, which is optimum for equipment requiring silence, such as consumer equipment power supply, car
audio system, etc.
• Low-voltage operation possible, with wide operating voltage range (2.2 to 14.0V)
• Low saturation output (Upper + lower saturation voltage : V sat (total) = 1.1Vtyp, I = 100mA)
O
O
: High coil efficiency with low current drain. Additionally, IC itself generates only small heat.
• Built-in lock protection and automatic reset circuits
• Built-in FG & 1/2FG outputs
• Built-in Hall bias (V
= 1.5V)
HB
• Thermal protection circuit
: When the large current flows due to output short-circuit and the IC chip temperature exceeds 180°C, this protective
circuit suppresses the drive current to prevent burn and damage to IC.
• Extra-small package (MSOP10)
Specifications
Absolute Maximum Ratings at Ta = 25°C
Parameter
Symbol
Conditions
Ratings
Unit
V
Output voltage
V
max
15
400
0.6
15
CC
Allowable power dissipation
Output current
Pd max
Mounted on a specified board*
mW
A
I
max
OUT
Output withstand voltage
V
max
V
OUT
Continued on next page.
Any and all SANYO Semiconductor Co.,Ltd. products described or contained herein are, with regard to
"standard application", intended for the use as general electronics equipment. The products mentioned herein
shall not be intended for use for any "special application" (medical equipment whose purpose is to sustain life,
aerospace instrument, nuclear control device, burning appliances, transportation machine, traffic signal system,
safety equipment etc.) that shall require extremely high level of reliability and can directly threaten human lives
in case of failure or malfunction of the product or may cause harm to human bodies, nor shall they grant any
guarantee thereof. If you should intend to use our products for new introduction or other application different
from current conditions on the usage of automotive device, communication device, office equipment, industrial
equipment etc. , please consult with us about usage condition (temperature, operation time etc.) prior to the
intended use. If there is no consultation or inquiry before the intended use, our customer shall be solely
responsible for the use.
Specifications of any and all SANYO Semiconductor Co.,Ltd. products described or contained herein stipulate
the performance, characteristics, and functions of the described products in the independent state, and are not
guarantees of the performance, characteristics, and functions of the described products as mounted in the
customer's products or equipment. To verify symptoms and states that cannot be evaluated in an independent
device, the customer should always evaluate and test devices mounted in the customer
's products or
equipment.
92811 SY 20110922-S00002/D0606 MS PC B8-7868 No.A0603-1/5