TW
Hybrid D’Sub series
ꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀ
Amphenol D’Sub TW Hybrid Series permits
a mix of contacts including signal, power,
shielded, high voltage and fiber optics in the
same housing with different contacts
arrangements.
• Connectors according to: MIL C24308 - NFC93425 - HE507
Materials and plating
Electrical Data
7.5 A. with 10 A. peak
Shells
Steel-Tin plating Current rating
Signal contacts
This economic series was first developed from
our military series, and has improved features:
Insulators
High temperature black thermoplastic
Power contacts
Signal contacts
Material
Female: machined bronze
Male: machined brass
PCB terminations
Solder cup terminations
Crimp terminations
Shielded contacts
10 to 40 A.
10 to 40 A.
10 to 40 A.
0.5 A.
- new contacts
Plating finish
Or
15µ" Au over 79µ" Ni min.
30µ" Au over 79µ" Ni min.
- new high temperature black thermoplastic insert
- PCB configurations come preloaded with
fixed contacts and brackets.
Shielded contacts
Material
Female: machined bronze
Male: machined brass
Voltage rating
Signal and power contacts 300 V.R.M.S. at 50 Hz
Shielded contacts
Plating
Inner conductor
Outer ring
Terminations
Except solder cup and crimp terminations gold flash
150 V.R.M.S. at 50 Hz
These connectors are supplied with screw
machined contacts fixed in the insulator.
15µ" Au or 30µ" Au over 79µ" Ni
Flash Au over 79µ" Ni
Tinned
Shielded contacts
Frequency range
Attenuation
V. S. W. R.
Characteristic impedance
0-1 GHz
0.2dB
1.4(+0.04/GHz)
50 Ohms
A complete range of housings are also
available for cable application.
Power contacts
Material
Female: machined bronze
Male: machined brass
Dielectric withstanding
voltage
Plating
Contacts
Terminations
A full series of
arrangements
compatible with
reflow process
1000 V.R.M.S. at 50Hz
15µ" Au or 30µ" Au over 79µ" Ni
Tinned
Insulation resistance 5000 M Ohms at 500 VDC
Contact resistance
5m Ohms
1m Ohm
Except solder cup and crimp terminations gold flash
Shell resistance
(electrical grounding)
Brackets
Steel-Tin plating
Brass-Tin plating
Brass-Tin plating
Bronze-Tin plating
Brass-Tin plating
Front jackscrews
Rear clinch nuts
Boardlocks
Stand-off
• Commercial
• Medical
Climatic Data
Mechanical data
Operating temperature
-55˚C + 155˚C Shells
With or without dimples
Contact retention force in dielectric material > 40N
Maximum mating and unmating force
(with peak 180˚C)
56 days (40˚C - 95% HR)
48 hours
• Industrial
• Telecom
Damp heat
Salt spray
With dimples
E size = 70 N
A size = 80 N
B size = 100 N
C size = 150 N
D size = 180 N
E size = 30 N
A size = 50 N
B size = 80 N
C size = 120 N
D size = 160 N
• Any application requiring
optimization of space
Without dimples
Compatible with process
IR - Air convectioned
260˚ for 20 s.
Resistance to solder iron heat
260˚C for 30 s.
Mating cycles
200 (class ll) or 500 (class l)