®
EZ-LIGHT Touch Gen 2 K30 FDA-Grade
Pick-to-Light
Datasheet
Compact, single-point devices for error-proofing of bin-picking operations
•
•
•
FDA-grade materials; rated to IEC IP67, IP68, and IP69K
Laser marked information withstands aggressive cleaning procedures
Excellent immunity to false triggering by water spray, detergents, oils, and other
foreign materials
•
Rugged, cost-effective and easy-to-install solutions for error-proofing and parts-
verification applications
•
•
Compact devices are completely self contained—No controller needed
Illuminated dome provides an easy-to-see green job light: some models also light
red for alternate operation
•
•
•
Easy actuation—no force required
12 to 30 V dc operation
Can be actuated with bare hands or in gloves
Models
1
Model
Function
Output
PNP, NO
PNP, NC
NPN, NO
NPN, NC
PNP, NO
PNP, NC
NPN, NO
NPN, NC
PNP, NO
PNP, NC
NPN, NO
NPN, NC
Connection
Job Light
K30APT2FGXDQP
K30RPT2FGXDQP
K30ANT2FGXDQP
K30RNT2FGXDQP
K30APT2FGRCQP
K30RPT2FGRCQP
K30ANT2FGRCQP
K30RNT2FGRCQP
K30APT2FGREQP
K30RPT2FGREQP
K30ANT2FGREQP
K30RNT2FGREQP
•
•
Job light is ON at all times while job input is active
Touch activates output
Green
150 mm (6 in) pigtail
PVC cable with a 4-
pin M12/Euro-style
male, stainless steel,
quick disconnect
(QD)
•
•
Job light is Green while job input is active
Touch activates output and overrides job light
(turns Red) for visual verification that action was
sensed
Green (Red)
Green (Red)
•
Job light is Green at all times while job input is
active
Touch activates output
A touch while job input is inactive causes unit to
light Red, providing visual verification that sensor
is functioning properly
•
•
Specifications
Supply Voltage
Power-Up Delay
12 to 30 V dc
300 milliseconds
Supply Current
Construction
55 mA max current (exclusive of load)
Base, dome, and nut: FDA-grade polycarbonate
Supply Protection Circuitry
Indicators
Protected against reverse polarity and transient voltages
Job ("Pick") Indicator: Green
Pick Sensed Indicator: Red or Off, depending on model
Output Rating
Maximum Load: 150 mA
ON-state saturation voltage: < 2 V at 10 mA dc; < 2.5 V at 150 mA
dc
Mounting
M22 × 1.5 Threaded base, max torque 2.25 N·m (20 in-lbf)
Connections
OFF-state leakage current: <10 µA at 30 V dc
150 mm (6 in) pigtail PVC cable with a 4-pin M12/Euro-style male,
stainless steel, quick disconnect (QD) or 2 m (6.5 ft) unterminated PVC-
jacketed cable, depending on model
Output Response Time:
150 milliseconds On and Off
1
To order the 2 m (6.5 ft) PVC cable models, omit suffix QP from model number (example, K30APT2FGXD). A model with a QD requires a
mating cable (see Cordsets).
Original Document
189834 Rev. C
10 February 2016
189834