Datasheet > K30APPBGREQ

K30APPBGREQ

更新时间： 2024-11-03 01:15:07

品牌	Logo	应用领域
邦纳 - BANNER		/
页数	文件大小	规格书
4页	219K
描述
EZ-LIGHTÂ® K30 Series Pick-to-Light Sensors

阅读下载

中文翻译

获取价格

数据手册

如果您发现信息不准确，欢迎纠错

K30APPBGREQ 数据手册

EZ-LIGHT K30 Series Pick-to-Light

Sensors

Datasheet

Compact, Single-Point Devices for Error Proofing of Bin-Picking Operations

•

Rugged, cost-effective and easy-to-install multicolor indicator light with pushbutton

Illuminated dome provides an easy-to-see green job light; some models also light

red for alternate operation

•

Waterproof IP65 construction for washdown environments

Compact devices are self-contained — no controller needed

Immune to EMI and RFI interference

12 V dc to 30 V dc operation

Cabled and quick disconnect models available

WARNING: Not To Be Used for Personnel Protection

Never use this device as a sensing device for personnel protection. Doing so could lead to

serious injury or death. This device does not include the self-checking redundant circuitry necessary

to allow its use in personnel safety applications. A sensor failure or malfunction can cause either an

energized or de-energized sensor output condition.

Models

Model

Function

Output

PNP, NO

NPN, NO

Connection

Job Light

K30APPBGXDQ

K30ANPBGXDQ

K30APPBGRCQ

•

Job light is ON at all times while job input is active.

Pressing push button activates output.

Green

•

Job light is green while job input is active, until push PNP, NO

button is pushed.

Pressing push button activates output and overrides

job light (it turns Red) for visual verification that

action was sensed.

Green (Red)

Integral 4-pin M12/

Euro-style quick

disconnect

K30ANPBGRCQ

K30APPBGREQ

K30ANPBGREQ

NPN, NO

PNP, NO

NPN, NO

•

Job light is ON at all times while job input is active.

Pressing push button activates output.

Pressing push button while job input is inactive

causes unit to light Red, providing visual indication

that sensor is functioning properly.

Overview

The solid-state output interfaces to a system controller, which is pre-programmed for a specific sequence of tasks.

Mounted in or near each bin in an assembler’s work station, the sensor job light signals the assembler:

•

Which bins contain items to be picked in a given operation; and

In what order they should be picked.

As the assembler takes a part in sequence and pushes the button, the sensor senses that the part was removed and sends

an output signal to the controller. The controller verifies if the correct part was taken and may respond by turning that job

light OFF, activating the job light of the next bin in the sequence.

If multiple parts are to be removed from one bin, the job light may remain ON until the appropriate number of signals is

returned to the controller. If an incorrect part is selected, the control system may be wired to signal an alarm for the

assembler and/or a supervisor, or it may be programmed to interpret the action as a call for parts.

Integral quick disconnect models are listed.

•

To order the 2 m (6.5 ft) PVC cable model, omit the suffix "Q" in the model number. For example, K30APPBGXD.

Models with a quick disconnect require a mating cordset.

Original Document

155796 Rev. D

22 November 2016

155796

12 3 4

中文翻译

下载PDF

与K30APPBGREQ相关器件

型号	品牌	获取价格	描述	数据表
K30APPBGXDQ	BANNER	获取价格	EZ-LIGHTÂ® K30 Series Pick-to-Light Sensors
K30APT2BXDT	BANNER	获取价格	EZ-LIGHTÂ® Touch Gen 2 K30 Series Pick-to-Lig
K30APT2FGRCQP	BANNER	获取价格	EZ-LIGHTÂ® Touch Gen 2 K30 FDA-Grade Pick-to-
K30APT2FGREQP	BANNER	获取价格	EZ-LIGHTÂ® Touch Gen 2 K30 FDA-Grade Pick-to-
K30APT2FGRF2QP	BANNER	获取价格	EZ-LIGHTÂ® Touch Gen 2 K30 FDA-Grade Series I
K30APT2FGRYF2QP	BANNER	获取价格	EZ-LIGHTÂ® Touch Gen 2 K30 FDA-Grade Series I
K30APT2FGXDQP	BANNER	获取价格	EZ-LIGHTÂ® Touch Gen 2 K30 FDA-Grade Pick-to-
K30APT2FRGF2QP	BANNER	获取价格	EZ-LIGHTÂ® Touch Gen 2 K30 FDA-Grade Series I
K30APT2FXGF2QP	BANNER	获取价格	EZ-LIGHTÂ® Touch Gen 2 K30 FDA-Grade Series I
K30APT2FXRF2QP	BANNER	获取价格	EZ-LIGHTÂ® Touch Gen 2 K30 FDA-Grade Series I

与K30APPBGREQ相关文章

英伟达新AI芯片Rubin或提前半年亮相
2024-11-05

7
苹果iPhone 17将全系采用三星/LG显示LTPO OLED面板
2024-11-05

4
三星深化印度制造布局，供应链本地化进程加速
2024-10-29

26
芯擎科技“星辰一号”自动驾驶芯片点亮成功，2025年量产在即
2024-10-29

25

产品中心

服务支持

精选活动

关于我们

帮助中心

K30APPBGREQ

K30APPBGREQ 数据手册

与K30APPBGREQ相关器件

与K30APPBGREQ相关文章

您还可以找

产品中心

服务支持

精选活动

关于我们

帮助中心

K30APPBGREQ

K30APPBGREQ 数据手册

与K30APPBGREQ相关器件

与K30APPBGREQ相关文章

您还可以找

您在本页遇到什么问题？