Datasheet > IW4541BD

IW4541BD

更新时间： 2024-11-13 21:53:43

品牌	Logo	应用领域
INTEGRAL		栅
页数	文件大小	规格书
5页	139K
描述
Programmable Timer High-Performance Silicon-Gate CMOS

阅读下载

中文翻译

获取价格

数据手册

如果您发现信息不准确，欢迎纠错

IW4541BD 数据手册

TECHNICAL DATA

IW4541B

Programmable Timer

High-Performance Silicon-Gate CMOS

The IW4541 programmable timer consists of a 16-stage binary

counter, an oscillator that is controlled by external R-C components (2

resistors and a capacitor), an automatic power-on reset circuit, and

output control logic. The counter increments on positive-edge clock

transitons and can also be reset via the MASTER RESET input.

The output from this timer is the Q or not Q output from the 8th,

10th, 13th, or 16th counter stage. The desired stage is chosen using

time-select inputs A and B. The output is available in either of two

modes selectable via the MODE input, pin 10. When this MODE input

is a logic “1”,the output will be a continuous square wave having a

frequency equal to the oscillator frequency divided by 2^N. With the

MODE input set to logic ”0” and after a MASTER RESET is initiated,

the output (assuming Q output has been selected) changes from a low

to a high state after 2^N-1counts and remains in that state until another

MASTER RESET pulse is applied or the MODE input is set to a logic

“1”.

ORDERING INFORMATION

IW4541BN Plastic

IW4541BD SOIC

T_A= -55° to 125° C for all packages

Timing is initialized by setting the AUTO RESET input (pin 5) to logic “0”and turning power on. If pin 5 is

set to logic “1”, the AUTO RESET circuit is disabled and counting will not start untill after a positive MASTER

RESET pulse is applied and returns to a low level. The AUTO RESET consumes an appreciable amount of

power and should not be used if low-power operation is desired. For reliable automatic power-on reset, V_CC

should be greater than 5V.

•

Operating Voltage Range: 3.0 to 18 V

Maximum input current of 1 µA at 18 V over full package-temperature range; 100 nA at 18 V and 25°C

Noise margin (over full package temperature range):

1.0 V min @ 5.0 V supply

2.0 V min @ 10.0 V supply

2.5 V min @ 15.0 V supply

PIN ASSIGNMENT

LOGIC DIAGRAM

NC = NO CONNECTION

PIN 14 =V_CC

PIN 7 = GND

PINS 4,11 = NO CONNECTION

173

12 3 4 5

中文翻译

下载PDF

与IW4541BD相关器件

型号	品牌	获取价格	描述	数据表
IW4541BN	IKSEMICON	获取价格	Programmable Timer High-Performance Silicon-Gate CMOS
IW4541BN	INTEGRAL	获取价格	Programmable Timer High-Performance Silicon-Gate CMOS
IW4803SA	XPPOWER	获取价格	DC-DC Power Supplies
IW4805SA	XPPOWER	获取价格	DC-DC Power Supplies
IW4809SA	XPPOWER	获取价格	DC-DC Power Supplies
IW4812SA	XPPOWER	获取价格	DC-DC Power Supplies
IW4812S-M	XPPOWER	获取价格	Analog Circuit
IW4815SA	XPPOWER	获取价格	DC-DC Power Supplies
IW4824SA	XPPOWER	获取价格	DC-DC Power Supplies
IW-5/100MHZ	KOA	获取价格	Ferrite Bead, 1 Function(s),