iW600
Secondary-Side Voltage Positioning Controller
1 Description
The iW600 is a secondary-side voltage position controller to detect the voltage undershoot. It can be used in Dialog’s
primary-side control systems to achieve ultra-low no-load power consumption and fast dynamic load response. The iW600
operates in “Normally-OFF” mode with negligible power consumption during power supply normal steady state operation,
while monitoring dynamic load change through the voltage on the secondary rectifier. A wake-up signal is transferred
through the flyback power transformer to the primary side when a dynamic load change is detected. The iW600 eliminates
loop compensation components and the optocoupler on the secondary side to minimize the bill of material cost.
2 Features
■ Fast system output voltage detection
■ No external components
■ Transmits detection signal to the primary side through
■ Enables <10mW no-load power consumption in typical
flyback transformer
5V-output systems
■ Two-electrical-terminal connection simplifies system
■ Available in 3-lead SOT-23 and 2-lead DFN packages
PCB layout
3 Applications
■ AC/DC adapters/chargers
L
2
1
iW600
D1
V
OUT
+
+
N
RTN
U1
iW1600
1
2
8
7
V
V
CC
SENSE
+
GND
GND
OUTPUT
CS/CDC
6
5
4
HV
RCDC
Figure 3.1: iW600 Typical Application Circuit (Using iW1600 as Primary-Side Controller) (Achieving < 10mW
No-load Power Consumption in 5V/2A 10W Adapter with Fast Dynamic Load Response)
09-Feb-2022
Product Summary
Rev. 1.3
www.renesas.com
© 2022 Renesas Electronics
1 of 6