xppower.com
1 Watts
IW Series
•
•
•
•
•
•
•
Regulated Single & Dual Output
Wide 2:1 Input Range
SIP or DIP Package
1000 VDC Isolation
Optional 3000 VDC Isolation
Continuous Short Circuit Protection
MTBF >2.7 MHrs
Specification
Input
General
Input Voltage Range
• 5 V models: 4.5 - 9.0 V
Efficiency
• See table
12 V models: 9.0 - 18.0 V
24 V models: 18.0 - 36.0 V
48 V models: 36.0 - 72.0 V
Isolation Voltage
Isolation Resistance
• 1000 VDC, optional 3000 VDC (see note 2)
• 109 Ω
Isolation Capacitance • 60 pF typical
Input Reflected Ripple • 35 mA pk-pk through 12 µH inductor
Switching Frequency
MTBF
• 100-650 kHz typical
5 Hz to 20 MHz
• >2.7 MHrs to MIL-STD-217F
Input Current
Input Filter
• See table
• Capacitor
Physical
Case Material
• Non-conductive black plastic (UL94V-0
rated). Optional metal:
nickel coated copper
Output
Output Voltage
• See table
Line Regulation
Load Regulation
Setpoint Accuracy
Start Up Rise Time
Ripple & Noise
•
•
•
0.5ꢀ maꢁ
Pin Material
• SIP case: Alloy 42 solder coated
DIP case: ø0.5 mm brass solder coated
1.0ꢀ maꢁ from 25-100ꢀ load
2ꢀ maꢁ
Potting Material
• Epoꢁy (UL94V-0 rated)
• 100 ms typical
Lead Soldering
Temperature
• 260 ºC 1.5 mm from case for 10 s
• 80 mV pk-pk maꢁ 20 MHz BW. See note 6
Temperature Coefficient • 0.02ꢀ/°C
Environmental
Short Circuit Protection • Continuous with auto recovery
Operating Temperature • -40 °C to +85 °C, derate from 100ꢀ load
Current Limiting
• Typically 110ꢀ of maꢁ Iout
at 85 ºC to 0ꢀ load at 100 ºC
Cross Regulation
Transient Response
•
•
5ꢀ
Storage Temperature
Case Temperature
Cooling
• -40 °C to +125 °C
• 100 °C maꢁ
3ꢀ deviation recovering to <1ꢀ
within 300 µs for 25ꢀ load change
• Convection-cooled
• 95ꢀ RH, non condensing
Maximum Capacitive
Load
• See table
Humidity
Remote On/Off
• Optional on SIP package models
applying 5 V via 1 kΩ current limiting
resistor & diode turns output off
(see note 4)