iW632
RapidCharge™ Dedicated Charging Port Controller for
Qualcomm® Quick Charge™ 2.0 and Divider Mode
1 Description
The iW632 is a RapidCharge™ Dedicated Charging Port (DCP) controller for Qualcomm® Quick ChargeTM 2.0
(QC2.0) technology, optional Samsung Adaptive Fast Charging (AFC) and divider mode USB interface. It allows
rapid charging of QC2.0 or divider mode enabled mobile devices (MDs), and it automatically identifies QC2.0, AFC
and divider mode protocols. The iW632 resides on the USB port of the power adapter and allows the adapter to be
configured for multi-level output such as 5V, 9V, or 12V depending on the voltage requested by MD. It can be used
in DC/DC power converter systems to achieve smooth voltage transition and low no-load power consumption. The
iW632 implements three output pins for output feedback ratio change, output over-voltage, and fault and reset signals.
In addition, iW632 also implements proprietary D+/D- over-voltage protection (OVP) and proprietary D- impedance
detection to address soft short issues in the output cables and connectors that can be caused by such things as a
poor or loose connection between the cable connector and the socket, contamination in the USB connector, or a
worn-out cable, and provides protection against the damages.
Dialog’s innovative proprietary technology ensures that power supplies designed with the iW632 can provide multi-
level output voltage configuration, smooth voltage transition and ultra-low no load power consumption.
2 Features
● Proprietary D+/D- OVP and proprietary D-
impedance detection address soft short issues in
the output cables and connectors and provides
protection against damages
● Supports Qualcomm® QC2.0 High Voltage Dedicated
Charging Port (HVDCP) Class A with voltage
configuration of 5V, 9V, and 12V
● Supports divider mode with D+/D- at 2.7V/2.0V for
● Programmable active fast discharge from 9V/12V
to 5V at MD unplug or from a high voltage level to
a lower level upon request with built-in switch or
external switch
2.1A rapid charging
● Optionally supports Samsung Adaptive Fast Charging
(AFC) for output voltage and current negotiation
● Backward compatible with USB Battery Charging
● Normally OFF state with <120µA cut-off current
during 5V steady-state operation to achieve ultra-low
power consumption at no load
Specification Revision 1.2 (USB BC1.2) DCP
● Backward compatible with Chinese Telecom Standard
YD/T 1591-2009 Shorted Mode
● Wide operating voltage range from 3V to 25V
● Automatically differentiates MDs and determines rapid
charging protocols
3 Applications
● DC/DC converters/chargers for smart phones, tablets,
and other mobile devices
Qualcomm® Quick ChargeTM 2.0 is a product of Qualcomm Technologies, Inc.
VOUT
U1
iW632
V_Logic_H
1
DIS
VCC
OVP
V1
D+
GND
D-
8
7
6
D+
D-
2
3
4
Power
Converter
OVP
5
V2
FB
GND
Figure 3.1 : iW632 Typical Application Circuit
08-February-2017
Product Summary
Rev. 1.1
www.dialog-semiconductor.com
1 of 6
© 2017 Dialog Semiconductor