Switching Charger for 1-Cell Li-ion Batteries
ISL9220B
Features
• Highly Integrated Battery Charger IC
• Charges 1 Li-ion or Li-Polymer Batteries
• Up to 2A Charge Current
The ISL9220B is a cost-effective and versatile battery
charger for 1-cell Li-Polymer based portable applications.
The device features synchronous PWM technology,
maximizing power efficiency, thus minimizing charge
time and heat. The 1.2MHz switching frequency allows
use of small external inductors and capacitors.
• Synchronous Buck Topology, with Integrated Power
FETs
• 1.2MHz Switching Frequency
• 0.5% Charge Voltage Accuracy
A simple charge current programming method is
provided. External resistors program the fast charge and
end-of-charge currents.
• Input Current Limit Programmable with One External
Resistor
The two status outputs can be used to drive LEDs, or can
be connected to the host processor.
• Thermistor Interface for Battery Detection and
Temperature Qualified Charging
• Two Status Outputs
A programmable charge timer provides the ability to
detect defective batteries, and provides a secondary
method of detecting charge termination.
• Programmable Charge Safety Timer
• Short-Circuit and Thermal Protection
• Small 4x4mm TQFN Package
A thermistor interface is provided for battery presence
detection, and for temperature qualified charging
conditions.
• -40°C to +85°C Operating Temperature Range
Related Literature
Additional features include preconditioning of an
over-discharged battery, automatic recharge, and
thermally enhanced QFN package.
• Technical Brief TB363 “Guidelines for Handling and
Processing Moisture Sensitive Surface Mount Devices
(SMDs)”
Applications
• Technical Brief TB379 “Thermal Characterization of
Packaged Semiconductor Devices”
• PDAs and Smart Phones
• MP3 and Portable Media Players
• Handheld GPS Devices
• Digital Still Cameras
• Technical Brief TB389 “PCB Land Pattern Design and
Surface Mount Guidelines for QFN Packages”
• Industrial Handheld Scanners
Pin Configuration
ISL9220B
(20 LD TQFN)
TOP VIEW
July 2, 2010
FN7652.1
CAUTION: These devices are sensitive to electrostatic discharge; follow proper IC Handling Procedures.
1-888-INTERSIL or 1-888-468-3774 | Intersil (and design) is a registered trademark of Intersil Americas Inc.
Copyright Intersil Americas Inc. 2010. All Rights Reserved
1
All other trademarks mentioned are the property of their respective owners.