ISL90841
®
Quad Digitally Controlled Potentiometers (XDCP™)
Data Sheet
February 8, 2006
FN8094.1
2
Low Noise, Low Power I C® Bus, 256 Taps
Features
The ISL90841 integrates four digitally controlled
potentiometers (XDCP) on a monolithic CMOS integrated
circuit.
• Four potentiometers in one package
• 256 resistor taps - 0.4% resolution
2
• I C serial interface
The digitally controlled potentiometers are implemented with
a combination of resistor elements and CMOS switches. The
position of the wipers are controlled by the user through the
• Wiper resistance: 70Ω typical @ 3.3V
• Standby current <5µA max
• Power supply: 2.7V to 5.5V
• 50kΩ, 10kΩ total resistance
• 14 Lead TSSOP
2
I C bus interface. Each potentiometer has an associated
Wiper Register (WR) that can be directly written to and read
by the user. The contents of the WR controls the position of
the wiper.
All four potentiometers have one terminal tied to GND. The
DCPs can be used as a resistor divider or as two-terminal
variable resistors in a wide variety of applications including
control, parameter adjustments, and signal processing.
• Pb-free plus anneal available (RoHS compliant)
Pinout
ISL90841
(14 LEAD TSSOP)
TOP VIEW
RH3
RW3
SCL
SDA
GND
RW2
RH2
1
2
3
4
5
6
7
14
13
12
11
10
9
RW0
RH0
VCC
A1
A0
RH1
RW1
8
Ordering Information
RESISTANCE OPTION
TEMP RANGE
(°C)
PART NUMBER
ISL90841UIV1427Z (Notes 1 & 2)
ISL90841WIV1427Z (Notes 1 & 2)
NOTES:
PART MARKING
90841UI27Z
90841WI27Z
(Ω)
PACKAGE
50K
10K
-40 to +85
-40 to +85
14 Ld TSSOP (Pb-Free)
14 Ld TSSOP (Pb-Free)
1. Intersil Pb-free plus anneal products employ special Pb-free material sets; molding compounds/die attach materials and 100% matte tin plate
termination finish, which are RoHS compliant and compatible with both SnPb and Pb-free soldering operations. Intersil Pb-free products are MSL
classified at Pb-free peak reflow temperatures that meet or exceed the Pb-free requirements of IPC/JEDEC J STD-020.
2. Add “-TK” to suffix for Tape and Reel.
CAUTION: These devices are sensitive to electrostatic discharge; follow proper IC Handling Procedures.
1
1-888-INTERSIL or 1-888-468-3774 | Intersil (and design) is a registered trademark of Intersil Americas Inc.
XDCP is a trademark of Intersil Americas Inc. Copyright Intersil Americas Inc. 2005, 2006. All Rights Reserved
All other trademarks mentioned are the property of their respective owners.