ISL90726
®
Single Volatile 128-Tap XDCP
Data Sheet
August 3, 2005
FN8244.1
Digitally Controlled Potentiometer
(XDCP™)
Features
• Volatile Solid-State Potentiometer
The Intersil ISL90726 is a digitally controlled potentiometer
(XDCP). The device consists of a resistor array, wiper
switches, and a control section. The wiper position is
2
• I C Serial Bus Interface
• DCP Terminal Voltage, 2.7V to 5.5V
2
controlled by an I C interface.
• Low Tempco
- Rheostat - 45 ppm/°C typical @ 25°C
The potentiometer is implemented by a resistor array
composed of 127 resistive elements and a wiper switching
network. Between each element and at either end are tap
points accessible to the wiper terminal. The position of the
wiper element is controlled by the SDA and SCL inputs.
- Divider - 15 ppm/°C typical @ 25°C
• 128 Wiper Tap Points
- Wiper resistance 70Ω typ at V
= 3.3V
CC
• Low Power CMOS
- Active current, 200µA max
- Standby current, 500nA max
The device can be used in a wide variety of applications
including:
• Mechanical potentiometer replacement
• Available R
TOTAL
Values = 50kΩ, 10kΩ
• Transducer adjustment of pressure, temperature, position,
chemical, and optical sensors
• Power on Preset to Midscale
• Direct replacement for AD5246
• Laser diode and LED biasing
• Packaging
- 6 Ld SC70
• LCD brightness and contrast adjustment
• Gain control and offset adjustment
• Pb-free plus anneal available (RoHS compliant)
Ordering Information
Pinout
TEMP
ISL90726
(6-PIN SC70)
TOP VIEW
PART NUMBER
(See Note)
RESISTANCE
RANGE
(°C)
PACKAGE
(Pb-Free)
OPTION (Ω)
ISL90726WIE6Z
ISL90726UIE6Z
10K
50K
10K
50K
-40 to +85
-40 to +85
-40 to +85
-40 to +85
6-Pin SC-70
6-Pin SC-70
6-Pin SC-70
6-Pin SC-70
VDD
GND
SCL
1
2
3
6
5
4
RL
RW
SDA
ISL90726WIE6Z-TK
ISL90726UIE6Z-TK
NOTE: Intersil Pb-free plus anneal products employ special Pb-free
material sets; molding compounds/die attach materials and 100%
matte tin plate termination finish, which are RoHS compliant and
compatible with both SnPb and Pb-free soldering operations. Intersil
Pb-free products are MSL classified at Pb-free peak reflow
temperatures that meet or exceed the Pb-free requirements of
IPC/JEDEC J STD-020.
CAUTION: These devices are sensitive to electrostatic discharge; follow proper IC Handling Procedures.
1
1-888-INTERSIL or 1-888-468-3774 | Intersil (and design) is a registered trademark of Intersil Americas Inc.
XDCP is a trademark of Intersil Americas Inc. Copyright Intersil Americas Inc. 2005. All Rights Reserved
All other trademarks mentioned are the property of their respective owners.