ISL90727, ISL90728
®
Single Volatile 128-Tap XDCP
Data Sheet
August 2, 2006
FN8247.4
Digitally Controlled Potentiometer
(XDCP™)
Features
• Volatile Solid-State Potentiometer
The Intersil ISL90727 and ISL90728 are digitally controlled
potentiometers (XDCP). Each device consists of a resistor
array, wiper switches, and a control section. The wiper
2
• I C Serial Bus Interface
• DCP Terminal Voltage, 2.7V to 5.5V
2
position is controlled by an I C interface.
• Low Tempco
- Rheostat - 45 ppm/°C typical
- Divider - 15 ppm/°C typical
The potentiometer is implemented by a resistor array
composed of 127 resistive elements and a wiper switching
network. Between each element and at either end are tap
points accessible to the wiper terminal. The position of the
wiper element is controlled by the SDA and SCL inputs.
• 128 Wiper Tap Points
- Wiper resistance 70Ω typ at V
= 3.3V
CC
• Low Power CMOS
The device can be used in a wide variety of applications
including:
- Active current, 200µA max
- Standby current, 500nA max
• Mechanical potentiometer replacement
• Available R
TOTAL
Values = 50kΩ, 10kΩ
• Transducer adjustment of pressure, temperature, position,
chemical, and optical sensors
• Power on Preset to Midscale
• Direct Replacement for AD5247
• RF amplifier biasing
• Packaging
- 6 Ld SC-70
• LCD brightness and contrast adjustment
• Gain control and offset adjustment
• Pb-Free Plus Anneal Available (RoHS Compliant)
Pinout
ISL90727, ISL90728
(6 LD SC-70)
TOP VIEW
VDD
GND
SCL
1
2
3
6
5
4
RH
RW
SDA
Ordering Information
PART NUMBER
TEMP RANGE
(°C)
PACKAGE
(Pb-Free)
(See Notes 1, 2)
ISL90727WIE627Z-TK
ISL90727UIE627Z-TK
ISL90728WIE627Z-TK
NOTES:
PART MARKING
ANH
R
(kΩ)
PKG. DWG. #
P6.049
TOTAL
10
-40 to +85
-40 to +85
-40 to +85
6 Ld SC-70
ANI
50
10
6 Ld SC-70
6 Ld SC-70
P6.049
P6.049
CCF
1. Intersil Pb-free plus anneal products employ special Pb-free material sets; molding compounds/die attach materials and 100% matte tin plate
termination finish, which are RoHS compliant and compatible with both SnPb and Pb-free soldering operations. Intersil Pb-free products are
MSL classified at Pb-free peak reflow temperatures that meet or exceed the Pb-free requirements of IPC/JEDEC J STD-020
2
2
2. ISL90727 has an I C address 5Ch and ISL90728 has an I C address 7Ch
CAUTION: These devices are sensitive to electrostatic discharge; follow proper IC Handling Procedures.
1
1-888-INTERSIL or 1-888-468-3774 | Intersil (and design) is a registered trademark of Intersil Americas Inc.
XDCP is a trademark of Intersil Americas Inc. Copyright Intersil Americas Inc. 2005-2006. All Rights Reserved
All other trademarks mentioned are the property of their respective owners.