DATASHEET
ISL90727, ISL90728
Single Volatile 128-Tap XDCP™ Digitally Controlled Potentiometer (XDCP)
FN8247
Rev 8.00
May 10, 2012
The Intersil ISL90727 and ISL90728 are digitally controlled
potentiometers (XDCP™). Each device consists of a resistor
Features
• Volatile Solid-State Potentiometer
array, wiper switches, and a control section. The wiper
2
2
position is controlled by an I C Bus™.
• I C Serial Bus Interface
• DCP Terminal Voltage, 2.7V to 5.5V
The potentiometer is implemented by a resistor array
composed of 127 resistive elements and a wiper switching
network. Between each element and at either end are tap
points accessible to the wiper terminal. The position of the
wiper element is controlled by the SDA and SCL inputs.
• Low Tempco
- Rheostat - 45 ppm/°C Typical
- Divider - 15 ppm/°C Typical
• 128 Wiper Tap Points
- Wiper Resistance 70 Typ at V
= 3.3V
Pinout
CC
• Low Power CMOS
ISL90727, ISL90728
(6 LD SC-70)
- Active Current, 200µA Max
- Standby Current, 500nA Max
TOP VIEW
• Available R
TOTAL
Values = 50k10k
VDD
GND
SCL
1
2
3
6
5
4
RH
• Power-on Preset to Midscale
RW
SDA
• Packaging
- 6 Ld SC-70
• Pb-Free (RoHS Compliant)
Applications
• Mechanical Potentiometer Replacement
• Transducer Adjustment of Pressure, Temperature,
Position, Chemical, and Optical Sensors
• RF Amplifier Biasing
• LCD Brightness and Contrast Adjustment
• Gain Control and Offset Adjustment
Ordering Information
PART NUMBER
(Notes 1, 2, 3, 4)
PART MARKING
(Bottom Side)
R
TEMP RANGE
(°C)
PACKAGE
(Pb-Free)
PKG.
DWG. #
TOTAL
(k)
ISL90727UIE627Z-TK
ISL90727WIE627Z-T7A
ISL90727WIE627Z-TK
ISL90728UIE627Z-TK
ISL90728WIE627Z-T7A
ISL90728WIE627Z-TK
NOTES:
ANI
50
10
10
50
10
10
-40 to +85
-40 to +85
-40 to +85
-40 to +85
-40 to +85
-40 to +85
6 Ld SC-70
P6.049
ANH
ANH
CDY
CCF
CCF
6 Ld SC-70
6 Ld SC-70
6 Ld SC-70
6 Ld SC-70
6 Ld SC-70
P6.049
P6.049
P6.049
P6.049
P6.049
1. Please refer to TB347 for details on reel specifications.
2. These Intersil Pb-free plastic packaged products employ special Pb-free material sets, molding compounds/die attach materials, and 100% matte tin
plate plus anneal (e3 termination finish, which is RoHS compliant and compatible with both SnPb and Pb-free soldering operations). Intersil Pb-free
products are MSL classified at Pb-free peak reflow temperatures that meet or exceed the Pb-free requirements of IPC/JEDEC J STD-020.
3. For Moisture Sensitivity Level (MSL), please see device information page for ISL90727, ISL90728. For more information on MSL please see
Tech Brief TB363.
2
2
4. ISL90727 has an I C address 5Ch and ISL90728 has an I C address 7Ch.
FN8247 Rev 8.00
May 10, 2012
Page 1 of 8