Datasheet > ISL81483IBZ-T

ISL81483IBZ-T

更新时间： 2024-02-17 05:40:09

品牌	Logo	应用领域
瑞萨 - RENESAS		驱动信息通信管理光电二极管接口集成电路驱动器
页数	文件大小	规格书
14页	836K
描述
5V, Half Duplex, 250kbps Slew Rate Limited, RS-485/RS-422 Transceiver; PDIP8, SOIC8; Temp Range: -40° to 85°C

阅读下载

获取价格

技术参数
数据手册

如果您发现信息不准确，欢迎纠错

ISL81483IBZ-T 技术参数

生命周期：	Unknown	零件包装代码：	PDIP, SOIC
包装说明：	ROHS COMPLIANT, PLASTIC, MS-012AA, SOIC-8	针数：	8, 8
Reach Compliance Code：	compliant	ECCN代码：	EAR99
HTS代码：	8542.39.00.01	Factory Lead Time：	15 weeks
风险等级：	5.1	差分输出：	YES
驱动器位数：	1	高电平输入电流最大值：	0.000002 A
输入特性：	DIFFERENTIAL SCHMITT TRIGGER	接口集成电路类型：	LINE TRANSCEIVER
接口标准：	EIA-422; EIA-485	JESD-30 代码：	R-PDSO-G8
JESD-609代码：	e3	长度：	4.9 mm
湿度敏感等级：	3	功能数量：	1
端子数量：	8	最高工作温度：	85 °C
最低工作温度：	-40 °C	最小输出摆幅：	1.5 V
最大输出低电流：	0.004 A	封装主体材料：	PLASTIC/EPOXY
封装代码：	SOP	封装等效代码：	SOP8,.25
封装形状：	RECTANGULAR	封装形式：	SMALL OUTLINE
峰值回流温度（摄氏度）：	260	电源：	5 V
认证状态：	Not Qualified	最大接收延迟：	2000 ns
接收器位数：	1	座面最大高度：	1.75 mm
子类别：	Line Driver or Receivers	最大压摆率：	0.2 mA
最大供电电压：	5.5 V	最小供电电压：	4.5 V
标称供电电压：	5 V	表面贴装：	YES
技术：	BICMOS	温度等级：	INDUSTRIAL
端子面层：	Matte Tin (Sn) - annealed	端子形式：	GULL WING
端子节距：	1.27 mm	端子位置：	DUAL
处于峰值回流温度下的最长时间：	30	最大传输延迟：	2000 ns
宽度：	3.9 mm	Base Number Matches：	1

ISL81483IBZ-T 数据手册

DATASHEET

ISL8487, ISL81483, ISL81487

1/8 Unit Load, 5V, Low Power, High Speed or Slew Rate Limited, RS-485/RS-422

Transceivers

FN6050

Rev 8.00

March 14, 2016

These Intersil RS-485/RS-422 devices are “fractional” unit

load (UL), BiCMOS, 5V powered, single transceivers that

Features

• Fractional Unit Load Allows up to 256 Devices on the Bus

• Specified for 10% Tolerance Supplies

meet both the RS-485 and RS-422 standards for balanced

communication. Unlike competitive devices, this Intersil

family is specified for 10% tolerance supplies (4.5V to 5.5V).

• Class 3 ESD Protection (HBM) on all Pins. . . . . . . . >7kV

• High Data Rate Version (ISL81487). . . . . . . up to 5Mbps

The ISL81483 and ISL81487 present a 1/8 unit load to the

RS-485 bus, which allows up to 256 transceivers on the

network for large node count systems (e.g., process

automation, remote meter reading systems). The 1/4 UL

ISL8487 allows up to 128 transceivers on the bus. In a

remote utility meter reading system, individual (apartments

for example) utility meter readings are routed to a

concentrator via an RS-485 network, so the high allowed

node count minimizes the number of repeaters required to

network all the meters. Data for all meters is then read out

from the concentrator via a single access port, or a wireless

link.

• Slew Rate Limited Versions for Error Free Data

Transmission (ISL8487, ISL81483) . . . . . . .up to 250kbps

• Low Current Shutdown Mode (Except ISL81487) . . 0.5A

• Low Quiescent Supply Current:

- ISL8487, ISL81483. . . . . . . . . . . . . . . . . . 145A (Max.)

- ISL81487 . . . . . . . . . . . . . . . . . . . . . . . . . 420A (Max.)

• -7V to +12V Common Mode Input Voltage Range

• Three State Rx and Tx Outputs

• 30ns Propagation Delays, 5ns Skew (ISL81487)

• Half Duplex Pinouts

Slew rate limited drivers on the ISL8487 and ISL81483

reduce EMI, and minimize reflections from improperly

terminated transmission lines, or unterminated stubs in

multidrop and multipoint applications. Data rates up to

250kbps are achievable with these devices.

• Operate from a Single +5V Supply (10% Tolerance)

• Current Limiting and Thermal Shutdown for Driver

Overload Protection

Data rates up to 5Mbps are achievable by using the

ISL81487, which features higher slew rates.

• Drop-In Replacements for: MAX487 (ISL8487); MAX1483

(ISL81483); MAX1487, LMS1487 (ISL81487)

Receiver (Rx) inputs feature a “fail-safe if open” design,

which ensures a logic high Rx output if Rx inputs are floating.

• Pb-Free Plus Anneal Available (RoHS Compliant)

Applications

Driver (Tx) outputs are short circuit protected, even for

voltages exceeding the power supply voltage. Additionally,

on-chip thermal shutdown circuitry disables the Tx outputs to

prevent damage if power dissipation becomes excessive.

• High Node Count Networks

• Automated Utility Meter Reading Systems

• Factory Automation

These half duplex devices multiplex the Rx inputs and Tx

outputs to allow transceivers with Rx and Tx disable

functions in 8 lead packages.

• Security Networks

• Building Environmental Control Systems

• Industrial/Process Control Networks

TABLE 1. SUMMARY OF FEATURES

RECEIVER/

DRIVER

ENABLE?

PART

NUMBER

HALF/FULL

DUPLEX

NO. OF DEVICES DATA RATE SLEW-RATE

QUIESCENT LOW POWER

ALLOWED ON BUS

(Mbps)

LIMITED?

(A) SHUTDOWN? COUNT

120

ISL8487

Half

128

0.25

Yes

(No longer

available or

supported)

ISL81483

ISL81487

Half

256

0.25

Yes

120

350

Yes

FN6050 Rev 8.00

March 14, 2016

Page 1 of 14

12 3 4 5 6 7...14

下载PDF

与ISL81483IBZ-T相关器件

型号	品牌	描述	获取价格	数据表
ISL81483IP	INTERSIL	1/8 Unit Load, 5V, Low Power, High Speed or Slew Rate Limited, RS-485/RS-422 Transceivers	获取价格
ISL81483IPZ	INTERSIL	1/8 Unit Load, 5V, Low Power, High Speed or Slew Rate Limited, RS-485/RS-422 Transceivers	获取价格
ISL81483IPZ	RENESAS	5V, Half Duplex, 250kbps Slew Rate Limited, RS-485/RS-422 Transceiver; PDIP8, SOIC8; Temp	获取价格
ISL81485	INTERSIL	5V, 30Mbps, RS-485/RS-422 Transceiver	获取价格
ISL81485_04	INTERSIL	5V, 30Mbps, RS-485/RS-422 Transceiver	获取价格
ISL81485-86	INTERSIL	Providing high-performance solutions for every link in the signal chain	获取价格

产品中心

服务支持

精选活动

关于我们

帮助中心

ISL81483IBZ-T

ISL81483IBZ-T 技术参数

ISL81483IBZ-T 数据手册

与ISL81483IBZ-T相关器件

与ISL81483IBZ-T相关文章

您还可以找

产品中心

服务支持

精选活动

关于我们

帮助中心

ISL81483IBZ-T

ISL81483IBZ-T 技术参数

ISL81483IBZ-T 数据手册

与ISL81483IBZ-T相关器件

与ISL81483IBZ-T相关文章

您还可以找

您在本页遇到什么问题？