Datasheet > ISL81487

ISL81487

更新时间： 2024-01-16 00:10:45

品牌	Logo	应用领域
英特矽尔 - INTERSIL		/
页数	文件大小	规格书
13页	429K
描述
1/8 Unit Load, 5V, Low Power, High Speed or Slew Rate Limited, RS-485/RS-422 Transceivers

阅读下载

获取价格

技术参数
数据手册

如果您发现信息不准确，欢迎纠错

ISL81487 技术参数

生命周期：	Unknown	零件包装代码：	PDIP, SOIC
包装说明：	ROHS COMPLIANT, PLASTIC, MS-001BA, DIP-8	针数：	8, 8
Reach Compliance Code：	compliant	ECCN代码：	EAR99
HTS代码：	8542.39.00.01	Factory Lead Time：	22 weeks
风险等级：	5.36	Is Samacsys：	N
差分输出：	YES	驱动器位数：	1
高电平输入电流最大值：	0.000002 A	输入特性：	DIFFERENTIAL SCHMITT TRIGGER
接口集成电路类型：	LINE TRANSCEIVER	接口标准：	EIA-422; EIA-485
JESD-30 代码：	R-PDIP-T8	JESD-609代码：	e3
长度：	9.585 mm	功能数量：	1
端子数量：	8	最高工作温度：	85 °C
最低工作温度：	-40 °C	最小输出摆幅：	1.5 V
最大输出低电流：	0.004 A	封装主体材料：	PLASTIC/EPOXY
封装代码：	DIP	封装等效代码：	DIP8,.3
封装形状：	RECTANGULAR	封装形式：	IN-LINE
峰值回流温度（摄氏度）：	NOT APPLICABLE	电源：	5 V
认证状态：	Not Qualified	最大接收延迟：	250 ns
接收器位数：	1	座面最大高度：	5.33 mm
子类别：	Line Driver or Receivers	最大压摆率：	0.2 mA
最大供电电压：	5.5 V	最小供电电压：	4.5 V
标称供电电压：	5 V	表面贴装：	NO
技术：	CMOS	温度等级：	INDUSTRIAL
端子面层：	Matte Tin (Sn) - annealed	端子形式：	THROUGH-HOLE
端子节距：	2.54 mm	端子位置：	DUAL
处于峰值回流温度下的最长时间：	NOT APPLICABLE	最大传输延迟：	1200 ns
宽度：	7.62 mm	Base Number Matches：	1

ISL81487 数据手册

ISL8487, ISL81483, ISL81487

Data Sheet

December 2003

FN6050.2

1/8 Unit Load, 5V, Low Power, High Speed

or Slew Rate Limited, RS-485/RS-422

Trans ceivers

Features

• Fractional Unit Load Allows up to 256 Devices on the Bus

• Specified for 10% Tolerance Supplies

These Intersil RS-485/RS-422 devices are “fractional” unit

load (UL), BiCMOS, 5V powered, single transceivers that

meet both the RS-485 and RS-422 standards for balanced

communication. Unlike competitive devices, this Intersil

family is specified for 10% tolerance supplies (4.5V to 5.5V).

• Class 3 ESD Protection (HBM) on all Pins. . . . . . . . >7kV

• High Data Rate Version (ISL81487). . . . . . . up to 5Mbps

• Slew Rate Limited Versions for Error Free Data

Transmission (ISL8487, ISL81483) . . . . . . .up to 250kbps

The ISL81483 and ISL81487 present a 1/8 unit load to the

RS-485 bus, which allows up to 256 transceivers on the

network for large node count systems (e.g., process

automation, remote meter reading systems). The 1/4 UL

ISL8487 allows up to 128 transceivers on the bus. In a

remote utility meter reading system, individual (apartments

for example) utility meter readings are routed to a

concentrator via an RS-485 network, so the high allowed

node count minimizes the number of repeaters required to

network all the meters. Data for all meters is then read out

from the concentrator via a single access port, or a wireless

link.

• Low Current Shutdown Mode (Except ISL81487) . . . 1nA

• Low Quiescent Supply Current:

- ISL8487, ISL81483. . . . . . . . . . . . . . . . . . 120µA (Max.)

- ISL81487 . . . . . . . . . . . . . . . . . . . . . . . . . 300µA (Max.)

• -7V to +12V Common Mode Input Voltage Range

• Three State Rx and Tx Outputs

• 30ns Propagation Delays, 5ns Skew (ISL81487)

• Half Duplex Pinouts

• Operate from a Single +5V Supply (10% Tolerance)

• Current Limiting and Thermal Shutdown for driver

Overload Protection

Slew rate limited drivers on the ISL8487 and ISL81483

reduce EMI, and minimize reflections from improperly

terminated transmission lines, or unterminated stubs in

multidrop and multipoint applications. Data rates up to

250kbps are achievable with these devices.

• Drop-In Replacements for: MAX487 (ISL8487); MAX1483

(ISL81483); MAX1487, LMS1487 (ISL81487)

Applications

Data rates up to 5Mbps are achievable by using the

ISL81487, which features higher slew rates.

• High Node Count Networks

• Automated Utility Meter Reading Systems

• Factory Automation

Receiver (Rx) inputs feature a “fail-safe if open” design,

which ensures a logic high Rx output if Rx inputs are

floating.

• Security Networks

Driver (Tx) outputs are short circuit protected, even for

voltages exceeding the power supply voltage. Additionally,

on-chip thermal shutdown circuitry disables the Tx outputs to

prevent damage if power dissipation becomes excessive.

• Building Environmental Control Systems

• Industrial/Process Control Networks

These half duplex devices multiplex the Rx inputs and Tx

outputs to allow transceivers with Rx and Tx disable

functions in 8 lead packages.

TABLE 1. SUMMARY OF FEATURES

PART

NUMBER

HALF/FULL

DUPLEX

NO. OF DEVICES

ALLOWED ON BUS

DATA RATE SLEW-RATE

RECEIVER/

DRIVER ENABLE?

QUIESCENT LOW POWER

(Mbps)

0.25

LIMITED?

(µA) SHUTDOWN? COUNT

100

ISL8487

ISL81483

ISL81487

Half

128

256

Yes

100

250

CAUTION: These devices are sensitive to electrostatic discharge; follow proper IC Handling Procedures.

1-888-INTERSIL or 321-724-7143 | Intersil (and design) is a registered trademark of Intersil Americas Inc.

All other trademarks mentioned are the property of their respective owners.

12 3 4 5 6 7...13

下载PDF

与ISL81487相关器件

型号	品牌	描述	获取价格	数据表
ISL81487E	INTERSIL	【15kV ESD Protected, 1/8 Unit Load, 5V, Low P	获取价格
ISL81487E	RENESAS	5V, Half Duplex, 5Mbps, ±15kV ESD Protected,	获取价格
ISL81487EIB	INTERSIL	【15kV ESD Protected, 1/8 Unit Load, 5V, Low P	获取价格
ISL81487EIB*	INTERSIL	【15kV ESD Protected, 1/8 Unit Load, 5V, Low P	获取价格
ISL81487EIB-T	INTERSIL	【15kV ESD Protected, 1/8 Unit Load, 5V, Low P	获取价格
ISL81487EIBZ	INTERSIL	【15kV ESD Protected, 1/8 Unit Load, 5V, Low P	获取价格

与ISL81487相关文章

STM32H743技术深度剖析与应用案例探索
2024-05-30

17
LM321中文资料解析：引脚功能介绍、技术特点、技术特性分析
2024-05-30

16
74HC14芯片资料介绍：性能特性分析、引脚介绍
2024-05-30

14
LM1875芯片手册：功放参数分析、引脚说明、电路设计要点
2024-05-30

11

产品中心

服务支持

精选活动

关于我们

帮助中心

ISL81487

ISL81487 技术参数

ISL81487 数据手册

与ISL81487相关器件

与ISL81487相关文章

您还可以找

产品中心

服务支持

精选活动

关于我们

帮助中心

ISL81487

ISL81487 技术参数

ISL81487 数据手册

与ISL81487相关器件

与ISL81487相关文章

您还可以找

您在本页遇到什么问题？