Datasheet > ISL81486IBZ

ISL81486IBZ

更新时间： 2024-01-30 15:40:14

品牌	Logo	应用领域
英特矽尔 - INTERSIL		驱动器接口集成电路光电二极管信息通信管理
页数	文件大小	规格书
11页	550K
描述
5V, Ultra High Speed, PROFIBUS, RS-485/RS-422 Transceivers

阅读下载

获取价格

技术参数
数据手册

如果您发现信息不准确，欢迎纠错

ISL81486IBZ 技术参数

是否无铅：	不含铅	是否Rohs认证：	符合
生命周期：	Obsolete	零件包装代码：	TSSOP
包装说明：	LEAD FREE, PLASTIC, MO-187AA, MSOP-8	针数：	8
Reach Compliance Code：	compliant	ECCN代码：	EAR99
HTS代码：	8542.39.00.01	风险等级：	5.69
Is Samacsys：	N	差分输出：	YES
驱动器位数：	1	高电平输入电流最大值：	0.000001 A
输入特性：	DIFFERENTIAL SCHMITT TRIGGER	接口集成电路类型：	LINE TRANSCEIVER
接口标准：	EIA-422; EIA-485	JESD-30 代码：	S-PDSO-G8
JESD-609代码：	e3	长度：	3 mm
湿度敏感等级：	2	功能数量：	1
端子数量：	8	最高工作温度：	85 °C
最低工作温度：	-40 °C	最小输出摆幅：	2.3 V
最大输出低电流：	0.004 A	封装主体材料：	PLASTIC/EPOXY
封装代码：	TSSOP	封装等效代码：	TSSOP8,.19
封装形状：	SQUARE	封装形式：	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH
峰值回流温度（摄氏度）：	260	电源：	5 V
认证状态：	Not Qualified	最大接收延迟：	25 ns
接收器位数：	1	座面最大高度：	1.1 mm
子类别：	Line Driver or Receivers	最大压摆率：	1.5 mA
最大供电电压：	5.5 V	最小供电电压：	4.5 V
标称供电电压：	5 V	表面贴装：	YES
技术：	BICMOS	温度等级：	INDUSTRIAL
端子面层：	Matte Tin (Sn) - annealed	端子形式：	GULL WING
端子节距：	0.65 mm	端子位置：	DUAL
处于峰值回流温度下的最长时间：	40	最大传输延迟：	17 ns
宽度：	3 mm	Base Number Matches：	1

ISL81486IBZ 数据手册

ISL4486, ISL81486

Data Sheet

August 2004

FN6060.2

5V, Ultra High Speed, PROFIBUS®,

RS-485/RS-422 Transceivers

Features

• Specified for 10% Tolerance Supplies

The Intersil ISL4486 and ISL81486 are BiCMOS, 5V

powered, single transceivers that meet both the RS-485 and

RS-422 standards for balanced communication, and feature

the larger output voltage and higher data rate - up to

40Mbps - required by high speed PROFIBUS applications.

• High Data Rates

ISL4486 . . . . . . . . . . . . . . . . . . . . . . . . . . up to 40Mbps

ISL81486 . . . . . . . . . . . . . . . . . . . . . . . . . up to 30Mbps

• Large Differential Output Voltage . . . . . . . . . . 3V into 54Ω

• Low Bit-to-Bit (Part-to-Part) Skew for Parallel Applications

• 0.6 Unit Load Allows up to 50 Devices on the Bus

• ISL81486 is a Drop-In Replacement for the ADM1486

• Low Quiescent Current . . . . . . . . . . . . . . . . . . . . . 800µA

• -7V to +12V Common Mode Input Voltage Range

• Three-State Rx and Tx Outputs

Unlike competitive products, these Intersil devices are

specified for 10% tolerance supplies (4.5V to 5.5V) and

deliver at least a 2.3V differential output voltage over this

supply range. At the 5% tolerance specified by many

competitors, the ISL4486 delivers an unsurpassed 2.5V

differential signal into a 54Ω total load. This translates into

longer reach, or better data integrity, at the exceptional

40Mbps data rate.

• 14ns (Max) Propagation Delays, 2ns (Max) Skew

• Operates from a Single +5V Supply (10% Tolerance)

SCSI applications benefit from the ISL4486’s low receiver

and transmitter part-to-part skews, which make it perfect for

high speed parallel applications where large numbers of bits

must be simultaneously captured. The low bit-to-bit skew

eases the timing constraints on the data latching signal.

• Current Limiting and Thermal Shutdown for driver

Overload Protection

• Pb-free available

These devices present a “0.6 unit load” to the RS-485 bus,

which allows up to 50 transceivers on the network.

Applications

Receiver (Rx) inputs feature a “fail-safe if open” design,

which ensures a logic high Rx output if Rx inputs are floating.

• SCSI “Fast 40” Drivers and Receivers

• PROFIBUS DP and FMS Networks

• Factory Automation

Driver (Tx) outputs are short circuit protected, even for

voltages exceeding the power supply voltage. Additionally,

on-chip thermal shutdown circuitry disables the Tx outputs to

prevent damage if power dissipation becomes excessive.

• Field Bus Networks

• Security Networks

• Building Environmental Control Systems

• Industrial/Process Control Networks

Ordering Information

TEMP.

PKG.

PART NO. (BRAND) RANGE (°C)

PACKAGE

8 Ld SOIC

(Pb-free)

8 Ld MSOP

(Pb-free)

8 Ld SOIC

(Pb-free)

DWG. #

ISL4486IB (4486IB)

ISL4486IBZ (4486IB)

(See Note)

-40 to 85

M8.15

Pinout

ISL4486, ISL81486 (SOIC, MSOP)

TOP VIEW

ISL4486IU (4486)

ISL4486IUZ (4486)

(See Note)

-40 to 85

M8.118

B/Z

ISL81486IB (81486IB)

ISL81486IBZ

(81486IB) (See Note)

-40 to 85

M8.15

A/Y

GND

ISL81486IU (1486)

ISL81486IUZ (1486)

(See Note)

-40 to 85

8 Ld MSOP

(Pb-free)

M8.118

*Add “-T” suffix to part number for tape and reel packaging.

NOTE: Intersil Pb-free products employ special Pb-free material sets; molding

compounds/die attach materials and 100% matte tin plate termination finish, which

is compatible with both SnPb and Pb-free soldering operations. Intersil Pb-free

products are MSL classified at Pb-free peak reflow temperatures that meet or

exceed the Pb-free requirements of IPC/JEDEC J Std-020B.

CAUTION: These devices are sensitive to electrostatic discharge; follow proper IC Handling Procedures.

1-888-INTERSIL or 321-724-7143 | Intersil (and design) is a registered trademark of Intersil Americas Inc.

All other trademarks mentioned are the property of their respective owners.

12 3 4 5 6 7...11

下载PDF

与ISL81486IBZ相关器件

型号	品牌	描述	获取价格	数据表
ISL81486IBZ-T	INTERSIL	5V, Ultra High Speed, PROFIBUS, RS-485/RS-422 Transceivers	获取价格
ISL81486IU	INTERSIL	5V, Ultra High Speed, PROFIBUS, RS-485/RS-422 Transceivers	获取价格
ISL81486IU-T	INTERSIL	5V, Ultra High Speed, PROFIBUS, RS-485/RS-422 Transceivers	获取价格
ISL81486IUZ	INTERSIL	5V, Ultra High Speed, PROFIBUS, RS-485/RS-422 Transceivers	获取价格
ISL81486IUZ-T	INTERSIL	5V, Ultra High Speed, PROFIBUS, RS-485/RS-422 Transceivers	获取价格
ISL81487	INTERSIL	1/8 Unit Load, 5V, Low Power, High Speed or Slew Rate Limited, RS-485/RS-422 Transceivers	获取价格

与ISL81486IBZ相关文章

ADXL345传感器工作原理、参数分析、引脚说明
2024-05-27

15
一文带你了解，DAC0832工作原理、输出电压范围、分辨率等参数
2024-05-27

3
ACS712电流检测使用指南及资料手册参数分析
2024-05-27

3
TLP521资料手册解读：参数分析、引脚说明、典型电路
2024-05-27

4

产品中心

服务支持

精选活动

关于我们

帮助中心

ISL81486IBZ

ISL81486IBZ 技术参数

ISL81486IBZ 数据手册

与ISL81486IBZ相关器件

与ISL81486IBZ相关文章

您还可以找

产品中心

服务支持

精选活动

关于我们

帮助中心

ISL81486IBZ

ISL81486IBZ 技术参数

ISL81486IBZ 数据手册

与ISL81486IBZ相关器件

与ISL81486IBZ相关文章

您还可以找

您在本页遇到什么问题？