High Performance 2A and 3A Linear Regulators
ISL80102, ISL80103
The ISL80102 and ISL80103 are low voltage, high-current, single
output LDOs specified for 2A and 3A output current, respectively.
These LDOs operate from input voltages of 2.2V to 6V and are
capable of providing output voltages of 0.8V to 5V on the
Features
• Stable with all Capacitor Types (Note 11)
• 2A and 3A Output Current Ratings
• 2.2V to 6V Input Voltage Range
adjustable V
versions. Fixed output voltage options are
OUT
• ±1.8% V
OUT
T = -40°C to +125°C
J
Accuracy Guaranteed Over Line, Load and
available in 1.8V, 2.5V, 3.3V and 5V. Other custom voltage
options available upon request.
• Very Low 120mV Dropout Voltage at 3A (ISL80103)
For applications that demand in-rush current less than the
current limit, an external capacitor on the soft-start pin provides
adjustment. The ENABLE feature allows the part to be placed into
a low quiescent current shutdown mode. A sub-micron BiCMOS
process is utilized for this product family to deliver the best in
class analog performance and overall value.
• Fixed and Adjustable V
OUT
Versions
• Very Fast Transient Response
• Excellent 62dB PSRR
• 100µV
Output Noise
RMS
These CMOS LDOs will consume significantly lower quiescent
current as a function of load over bipolar LDOs, which translates
into higher efficiency and the ability to consider packages with
smaller footprints. Quiescent current is modestly compromised
to enable a leading class fast load transient response, and hence
a lower total AC regulation band for an LDO in this category.
• Power-Good Output
• Adjustable In-Rush Current Limiting
• Short Circuit and Over-Temperature Protection
• Available in a 10 Ld DFN (now), 5 Ld TO220 and 5 Ld TO263
(soon)
Applications
• Servers
• Telecommunications and Networking
• Medical Equipment
• Instrumentation Systems
• Routers and Switchers
ISL80102, ISL80103
1.8V ±1.8%
2.5V ±10%
1
2
9
V
OUT
V
VOUT
VOUT
VIN
VIN
IN
C
C
10
OUT
IN
10µF
10µF
R
PG
100kΩ
ON
3
SENSE
PG
7
6
ENABLE
SS
OFF
4
PGOOD
*C
SS
GND
5
*CSS is optional, (see Note 12) on page 5.
FIGURE 1. TYPICAL APPLICATION
June 22, 2012
CAUTION: These devices are sensitive to electrostatic discharge; follow proper IC Handling Procedures.
1-888-INTERSIL or 1-888-468-3774 |Copyright Intersil Americas Inc. 2009-2012. All Rights Reserved
Intersil (and design) is a trademark owned by Intersil Corporation or one of its subsidiaries.
All other trademarks mentioned are the property of their respective owners.
1
FN6660.5