DATASHEET
ISL78236
FN8624
Rev.1.00
Mar. 14, 2017
Dual 3A Current Sharing 2.5MHz High Efficiency Synchronous Buck Regulator
The ISL78236 is a dual output, 3A/3A, integrated FET buck
Features
regulator for point-of-load power applications. The supply
• Dual 3A/3A independent outputs
voltage range is from 2.8V to 6V, allowing for the use of a
single Li+ cell, three NiMH cells, or a regulated 3V/5V bus
input. It is optimized for regulating output voltages down to
1.2V. Each channel provides an output current up to 3A, which
can be combined to form a single 6A output in current sharing
mode. The two channels operate 180° out of phase to reduce
input RMS current and EMI.
• 2.5MHz synchronous buck regulator with internal MOSFETs
up to 95% efficiency
• 2% voltage reference accuracy over-temperature
• 6A current sharing mode operation
• Internal or external compensation
The ISL78236 integrates a pair of low ON-resistance P-channel
and N-channel internal MOSFETs to maximize efficiency and
minimize external component count. It can operate up to
100% duty cycle to maximize operating life as battery voltage
drops out. When supplying 3A on each channel, the 100% duty
cycle operation limits the dropout voltage to less than 250mV.
Other features include internal digital soft-start, independent
channel enable for power sequencing, overcurrent protection,
and thermal shutdown.
• Peak current limiting and hiccup mode short circuit
protection
• Reverse overcurrent protection
• Over-temperature protection shutdown
• AEC-Q100 qualified
Applications
• DSP and embedded processor power supply
The ISL78236 is offered in a 24 Ld 4mmx4mm QFN package
with 1mm maximum height. The complete converter occupies
less than 1.5cm area.
• Infotainment system power
2
• Automotive point-of-load power
The ISL78236 is AEC - Q100 qualified and is rated for the
automotive temperature range (-40°C to +105°C).
Related Literature
• For a full list of related documents, visit our website
- ISL78236 product page
100
2.5V
1.8V
OUT
90
80
70
60
50
40
1.2V/3A
1.5V/3A
3V INPUT
EN1
LX1
LX2
FPGA OR DSP
POWER
1.2V
OUT
1.5V
OUT
PG1
EN2
PG2
ISL78236
OUT
ASIC POWER
0.0
0.5
1.0
1.5
2.0
2.5
3.0
OUTPUT LOAD (A)
FIGURE 1. TYPICAL APPLICATION BLOCK DIAGRAM: DUAL OUTPUT
3A/3A BUCK REGULATOR
FIGURE 2. EFFICIENCY vs LOAD CURRENT, V = 3.3V, T = +25°C
IN
A
FN8624 Rev.1.00
Mar. 14, 2017
Page 1 of 24