IPSU-M12 Series
Industrial Pressure Sensor - Ceramic - with M12 4-Pin Connector
Piezo-resistive thick film ceramic sensor
Stainless steel body
Accuracy < 0.25% FS BFSL
0-5V or 4-20mA output
Pressure ranges from -14.5 to 5800 psi
M12 4-pin connector
1/4" NPT process connection
The IPSU-M12 series is suitable for use in a wide range of industrial applications. The probe uses a
piezo-resistive ceramic sensor, giving excellent media compatibility within a stainless steel housing
The electronics incorporate a microprocessor based amplifier, requiring no adjusting and giving
stable electronics, especially industrial applications..
Each device is temperature compensated, calibrated and supplied with a traceable serial number
and calibration data. *
Mating cable and plug assemblies are available - see datasheet M12 Cable Set Series
Performance
Electrical Protection
Accuracy (Non-Linearity & Hysteresis) <± ±.25% / FS (BFSL)
Supply reverse polarity
Electromagnetic compatibility
No damage/no function
CE Compliant
Setting Errors (offsets)
2-wire Zero & Full Scale, <± ±.5% / FS
3-wire Zero & Full Scale, <± ±.5% / FS
Mechanical Stability
Shock
Vibration
Material Specifications
Housing
“O” ring seals
1±±g / 11s
1±g RMS (2± - 2±±±Hz)
316L Stainless Steel
Viton
Temperatures & Thermal Effects
Media Temperature
Ambient Temperature
Storage temperature
Compensated temperature range
Thermal Zero Shift (TZS)
Thermal Span Shift
Diaphragm
Media wetted parts
Ceramic Al2O3 96%
Housing & connection, “O” ring seal,
diaphragm
-4±ºC to +135ºC
-2±ºC to +8±ºC
-4±ºC to +125ºC
+2±ºC to +8±ºC
<± ±.±4% /FS/ºC
<± ±.±15% /ºC
Weight
Installation position
Operational Life
Insulation resistance
Environmental protection
Approx 1±±g
Any
> 1±±x 1±6 cycles
> 5±MOhms at 5±Vdc
IP67 (only when used with a similarly
rated connector)
Pressure Ranges and Passive mV/V Outputs
Nominal Pressure, Gauge, psi 15
Compound range psi -7.5 to ± -7.5 to 3±-15 to 75 -15 to 1235 -15 to 285 -15 to 36±
Permissible Overpressure psi
Burst Pressure psi
3±
75
15±
3±±
75±
15±±
375±
6±±±
3±
6±
6±
75
15±
18±
3±±
375
6±±
75±
15±±
18±±
3±±±
375±
6±±±
75±±
975±
975±
Output Signals and Supply Voltages
Wire system
2-wire
Output
4-2±mA
±-5Vdc
Supply Voltage
9-32Vdc
9-32Vdc
Connection Pin Nos
+ve Supply Pin 1
+ve Supply Pin 1
Output Pin 3
-ve Supply Pin 2
-ve Supply Pin 2
Earth Pin 4
Ground Earth Pin
3-wire
*Calibration data is supplied as a sticker affixed to the product packaging - do not discard
Cynergy3 Components Ltd.
7 Cobham Road
Ferndown Industrial Estate
Wimborne, Dorset BH21 7PE
Telephone +44 (±) 12±2 897969
Email:sales@cynergy3.com
www.cynergy3.com
ISO9001 CERTIFIED
Made in the UK
IPSU-M12 2±18
© 2±18 Cynergy3 Components, All Rights Reserved. Specifications are subject to change without prior notice. Cynergy3 Components and the Cynergy3 Components logo are trademarks of Cynergy3 Components Limited.