INA849
INA849
www.ti.com
SBOS945A – NOVEMBER 2020 – REVISED DECEMBER 2020
SBOS945A – NOVEMBER 2020 – REVISED DECEMBER 2020
INA849 Ultra-Low-Noise (1 nV/√Hz), High-Bandwidth, Instrumentation Amplifier
1 Features
3 Description
•
Ultra-low noise: 1-nV/√Hz input voltage noise
(typical)
The INA849 is an ultra-low noise instrumentation
amplifier optimized for maximum accuracy in high-
resolution systems and operation over a wide single-
supply or dual-supply range. The device offers
significantly lower input bias current than competitors
as a result of Super-beta input transistors. A state-of-
the-art manufacturing process provides exceptionally
low voltage noise, input offset voltage, and offset
voltage drift.
•
Precision super-beta input performance:
– Low offset voltage: 35 µV (maximum)
– Low offset voltage drift: 0.4 μV/°C (maximum)
– Low input bias current: 20 nA (maximum)
– Low gain drift: 5 ppm/°C for G = 1 (maximum)
Bandwidth: 28 MHz (G = 1), 8 MHz (G = 100)
Slew rate: 35 V/µs
Common-mode rejection: 120 dB (minimum) for
maximum gain
Supply range:
– Single supply: 8 V to 36 V
– Dual supply: ±4 V to ±18 V
Specified temperature range:
–40°C to +125°C
•
•
•
Precisely matched integrated resistors provide a high,
92-dB (G = 1) common-mode rejection across the full
input common-mode range. A single external resistor
sets any gain from 1 to 10,000. The current-feedback
topology of the INA849 provides wide bandwidth at
higher gains for very-small, fast-moving signals. For
example, the device provides 8 MHz of bandwidth at
G = 100, and 28 MHz at a G = 1, with a fast 0.4-µs
settling time (0.01%) for directly driving high-
resolution, analog-to-digital converters (ADCs).
•
•
•
Package: 8-pin SOIC
2 Applications
Device Information
•
•
•
•
•
•
•
•
Analog input module
Microphone preamplifier
Flow transmitter
Battery test
LCD test
Electrocardiogram (ECG)
Surgical equipment
Process analytics (pH, gas, concentration, force
and humidity)
PART NUMBER
INA849
PACKAGE(1)
BODY SIZE (NOM)
SOIC (8)
4.90 mm × 3.91 mm
MSOP (8) (Preview) 3.00 mm x 3.00 mm
(1) For all available packages, see the package option
addendum at the end of the data sheet.
+VS
100 nF
+VS
5 kꢀ
+
5 kꢀ
ÞIN
œ
RG
œ
3 kꢀ
3 kꢀ
OUT
REF
RG
+
VO = G V+IN - V-IN + V
(
)
REF
RG
+IN
œ
+
5 kꢀ
5 kꢀ
ÞVS
100 nF
ÞVS
INA849 Simplified Internal Schematic
Input-Referred Voltage Noise Spectral Density vs
Frequency
An IMPORTANT NOTICE at the end of this data sheet addresses availability, warranty, changes, use in safety-critical applications,
intellectual property matters and other important disclaimers. PRODUCTION DATA.
Product Folder Links: INA849
Copyright © 2020 Texas Instruments Incorporated
Submit Document Feedback
1