INA823
SBOSA75B – JULY 2021 – REVISED NOVEMBER 2021
INA823 Precision, Low-Power, Wide-Supply (2.7-V to 36-V) Instrumentation Amplifier
1 Features
3 Description
•
•
Input overvoltage protection up to ±60 V
Input voltage extends 150 mV below negative
supply
Low power supply current: 180 µA (typ)
Precision performance:
– Low offset voltage: 20 µV (typ), 100 µV (max)
– Low input bias current: 8nA (max)
– Common-mode rejection:
The INA823 is an integrated instrumentation amplifier
that offers low power consumption and operates
over a wide, single-supply or dual-supply range.
A single external resistor sets any gain from 1
to 10,000. The device provides low input offset
voltage, low offset voltage drift, low input bias
current, and low current noise while remaining
cost-effective. Additional circuitry protects the inputs
against overvoltage up to ±60 V.
•
•
•
•
•
84 dB, G = 1 (min)
104 dB, G = 10 (min)
120 dB, G ≥ 100 (min)
The INA823 is optimized to provide a high common-
mode rejection ratio. At G = 1, the common-mode
rejection ratio exceeds 84 dB across the full input
common-mode range. The INA823 has a wide
common-mode voltage range as low as 150-mV
below negative supply. The device is designed for
low-voltage operation from a 2.7-V single supply, and
dual supplies up to ±18 V. The low power and single
supply operation enable hand-held, battery-operated
systems.
– Power supply rejection: 100 dB, G = 1 (min)
Input voltage noise: 21 nV/√Hz
Bandwidth: 1.9 MHz (G = 1), 60 kHz (G = 100)
Stable with 1-nF capacitive loads
Supply range:
•
•
•
•
– Single-supply: 2.7 V to 36 V
– Dual-supply: ±1.35 V to ±18 V
Specified temperature range: –40°C to +125°C
Packages: 8-pin SOIC and 8-pin VSSOP
•
•
Device Information
PART NUMBER
INA823
PACKAGE(1)
BODY SIZE (NOM)
4.90 mm × 3.91 mm
3.00 mm x 3.00 mm
2 Applications
SOIC (8)
VSSOP (8)
•
•
•
•
•
•
•
•
•
Flow transmitter
Wearable fitness and activity monitor
Infusion pump
Blood glucose monitor
Electrocardiogram (ECG)
Surgical equipment
(1) For all available packages, see the package option
addendum at the end of the data sheet.
Weigh scale
Analog input module
Process analytics (pH, gas, concentration, force
and humidity)
•
Battery test
7
+VS
2
1
IN
RG
Overvoltage
Protection
50 k
+
–
50 k
–
+
50 k
50 k
6
5
OUT
REF
8
3
RG
+IN
–
Overvoltage
Protection
+
50 k
50 k
VS
4
INA823 Simplified Internal Schematic
Typical Distribution of
Input Stage Offset Voltage Drift
An IMPORTANT NOTICE at the end of this data sheet addresses availability, warranty, changes, use in safety-critical applications,
intellectual property matters and other important disclaimers. PRODUCTION DATA.