HSP43168
®
Data Sheet
July 27, 2009
FN2808.12
Dual FIR Filter
Features
The HSP43168 Dual FIR Filter consists of two independent
8-tap FIR filters. Each filter supports decimation from 1 to 16
and provides on-board storage for 32 sets of coefficients.
The Block Diagram shows two FIR cells each fed by a
separate coefficient bank and one of two separate inputs.
The outputs of the FIR cells are either summed or
multiplexed by the MUX/Adder. The compute power in the
FIR Cells can be configured to provide quadrature filtering,
complex filtering, 2-D convolution, 1-D/2-D correlations, and
interpolating/decimating filters.
• Two Independent 8-Tap FIR Filters Configurable as a
Single 16-Tap FIR
• 10-Bit Data and Coefficients
• On-Board Storage for 32 Programmable Coefficient Sets
• Up To: 256 FIR Taps, 16x16 2-D Kernels, or 10x19-Bit
Data and Coefficients
• Programmable Decimation to 16
• Programmable Rounding on Output
• Standard Microprocessor Interface
• Pb-Free Available (RoHS Compliant)
The FIR cells take advantage of symmetry in FIR coefficients
by pre-adding data samples prior to multiplication. This
allows an 8-tap FIR to be implemented using only 4
multipliers per filter cell. These cells can be configured as
either a single 16-tap FIR filter or dual 8-tap FIR filters.
Asymmetric filtering is also supported.
Applications
• Quadrature, Complex Filtering
• Image Processing
Decimation of up to 16 is provided to boost the effective
number of filter taps from 2 to 16 times. Further, the Decimation
Registers provide the delay necessary for fractional data
conversion and 2-D filtering with kernels to 16x16.
• Polyphase Filtering
• Adaptive Filtering
The flexibility of the Dual is further enhanced by 32 sets of
user programmable coefficients. Coefficient selection may
be changed asynchronously from clock to clock. The ability
to toggle between coefficient sets further simplifies
applications such as polyphase or adaptive filtering.
The HSP43168 is a low power fully static design
implemented in an advanced CMOS process. The
configuration of the device is controlled through a standard
microprocessor interface.
Ordering Information
TEMP. RANGE
PKG.
PART NUMBER
HSP43168VC-45
PART MARKING
HSP43168VC-45
HSP43168VC-45Z
HSP43168JC-33
HSP43168JC-33Z
(°C)
PACKAGE
100 Ld MQFP
DWG. #
0 to +70
0 to +70
0 to +70
0 to +70
Q100.14x20
HSP43168VC-45Z (Note)
HSP43168JC-33
100 Ld MQFP (Pb-free)
84 Ld PLCC
Q100.14x20
N84.1.15
HSP43168JC-33Z (Note)
84 Ld PLCC
N84.1.15
NOTE: These Intersil Pb-free plastic packaged products employ special Pb-free material sets, molding compounds/die attach materials, and 100%
matte tin plate plus anneal (e3 termination finish, which is RoHS compliant and compatible with both SnPb and Pb-free soldering operations). Intersil
Pb-free products are MSL classified at Pb-free peak reflow temperatures that meet or exceed the Pb-free requirements of IPC/JEDEC J STD-020.
CAUTION: These devices are sensitive to electrostatic discharge; follow proper IC Handling Procedures.
1
1-888-INTERSIL or 1-888-468-3774 | Intersil (and design) is a registered trademark of Intersil Americas Inc.
Copyright Intersil Americas Inc. 2000, 2001, 2004, 2007, 2009. All Rights Reserved
All other trademarks mentioned are the property of their respective owners.