Radiation Hardened Quad Differential Line Drivers
HS-26CT31RH, HS-26CT31EH
Features
The Intersil HS-26CT31RH, HS-26CT31EH are quad differential
line drivers designed for digital data transmission over
balanced lines and meet the requirements of EIA standard
RS-422. Radiation hardened CMOS processing assures low
power consumption, high speed, and reliable operation in the
most severe radiation environments.
• Electronically Screened to SMD #5962-95632
• QML Qualified Per MIL-PRF-38535 Requirements
• 1.2 Micron Radiation Hardened CMOS
• Total Dose Up to 300kRAD(Si)
• Latchup Free
The HS-26CT31RH, HS-26CT31EH accept TTL signal levels and
convert them to RS-422 compatible outputs. These circuits use
special outputs that enable the drivers to power down without
loading down the bus. Enable and disable pins allow several
devices to be connected to the same data source and
addressed independently.
• EIA RS-422 Compatible Outputs (Except for IOS)
• Operation with TTL Based on V = V /2
IH DD
• High Impedance Outputs when Disabled or Powered Down
• Low Power Dissipation 2.75mW Standby (Max)
• Single 5V Supply
• Low Output Impedance 10Ω or Less
Specifications
• Full -55°C to +125°C Military Temperature Range
Specifications for Rad Hard QML devices are controlled by the
Defense Logistics Agency Land and Maritime (DLA). The SMD
numbers listed here must be used when ordering.
Applications
• Line Transmitter for MIL-STD-1553 Serial Data Bus
Detailed Electrical Specifications for these devices are
contained in SMD 5962-95632. A “hot-link” is provided on our
homepage for downloading.
• Line Transmitter for RS422
http://www.landandmaritime.dla.mil/Downloads/MilSpec/S
md/95632.pdf
Ordering Information
ORDERING
NUMBER
INTERNAL
MKT. NUMBER
TEMP. RANGE
(°C)
PKG.
DWG. #
PART MARKING
Q 5962F95 63201QEC
Q 5962F95 63201QXC
Q 5962F95 63201VEC
Q 5962F95 63201VXC
HS1 - 26CT31RH /PROTO
HS9 - 26CT31RH /PROTO
PACKAGE
16 LD SBDIP
5962F9563201QEC
5962F9563201QXC
5962F9563201VEC
5962F9563201VXC
HS1-26CT31RH/PROTO
HS9-26CT31RH/PROTO
5962F9563201V9A
5962F9563202VXC
HS1-26CT31RH-8
-55 to +125
-55 to +125
-55 to +125
-55 to +125
-55 to +125
-55 to +125
-55 to +125
-55 to +125
D16.3
HS9-26CT31RH-8
16 LD Flatpack
16 LD SBDIP
K16.A
D16.3
K16.A
D16.3
K16.A
HS1-26CT31RH-Q
HS9-26CT31RH-Q
HS1-26CT31RH/PROTO
HS9-26CT31RH/PROTO
HS0-26CT31RH-Q
HS9-26CT31EH-Q
16 LD Flatpack
16 LD SBDIP
16 LD Flatpack
Q 5962F95 63202VXC
16 LD Flatpack
K16.A
February 23, 2012
FN2929.4
CAUTION: These devices are sensitive to electrostatic discharge; follow proper IC Handling Procedures.
1-888-INTERSIL or 1-888-468-3774 | Copyright Intersil Americas Inc. 2000, 2008, 2012. All Rights Reserved
Intersil (and design) is a trademark owned by Intersil Corporation or one of its subsidiaries.
Satellite Applications Flow™ (SAF) is a trademark of Intersil Corporation.
1
All other trademarks mentioned are the property of their respective owners.