Datasheet > HR08D-12WPK-2S(31)

HR08D-12WPK-2S(31)

更新时间： 2024-11-24 18:10:03

品牌	Logo	应用领域
广濑 - HRS		连接器
页数	文件大小	规格书
1页	71K
描述
连接器类型:插头;额定电流:3.0 A;PIN数:2;(Max.)使用温度范围:85 ℃;(Min.)使用温度范围:-20 ℃;防水性能:IP 68;耐电压:1500 V Max.;锁定方式:推导

阅读下载

中文翻译

获取价格

数据手册

如果您发现信息不准确，欢迎纠错

HR08D-12WPK-2S(31) 数据手册

APPLICABLE STANDARD

-25 C TO +85 C

AC 200 V , DC 250 V

3 A

-10 C TO +60 C

(φ8.0 TO φ9.0)

RATING

OPERATING TEMPERATURE RANGE

STORAGE TEMPERATURE RANGE

APPLICABLE CABLE

VOLTAGE

CURRENT

SPECIFICATIONS

TEST METHOD

ITEM

REQUIREMENTS

QT AT

CONSTRUCTION

GENERAL EXAMINATION

MARKING

VISUALLY AND BY MEASURING INSTRUMENT.

CONFIRMED VISUALLY.

ACCORDING TO DRAWING.

ELECTRIC CHARACTERISTICS

20 m MAX.

CONTACT RESISTANCE

CONTACT SHALL BE MEASURED AT DC 1 A (MIL-C-2316)

1000

M MIN.

INSULATION RESISTANCE

500 V DC. (MIL-STD-1344 3003)

VOLTAGE PROOF

1500 V AC FOR 1 min. (MIL-STD-1344 3001)

NO FLASHOVER OR BREAKDOWN.

MECHANICAL CHARACTERISTICS

―

CONTACT INSERTION AND

φ0.736

BY STEEL GAUGE.

INSERTION AND WITHDRAWAL FORCES : 0.2 N MIN.

-0.003

WITHDRAWAL FORCES

CONNECTOR INSERTION AND

WITHDRAWAL FORCES

MEASURED BY APPLICABLE CONNECTOR.

INSERTION AND WITHDRAWAL FORCE : 50 N MAX.

LOCKING DEVICE WITH UNLOCK

―

CONTACT RESISTANCE :

m MAX.

MECHANICAL OPERATION

500 TIMES INSERTIONS AND EXTRACTIONS.

(MIL-C-5015 4.6.12.2)

① NO ELECTRICAL DISCONTINUITY OF 10 s.

② NO DAMAGE, CRACK AND LOOSENESS OF PARTS.

VIBRATION

SHOCK

FREQUENCY 10 TO 500 Hz, SINGLE AMPLITUDE 0.75 mm,

98 m/s²AT 3 h, FOR 3 DIRECTIONS.

(MIL-STD-1344 2005,CONDITIONⅡ)

m/s²

DURATIONS OF PULSE 11ms AT 3 TIMES

―

① NO ELECTRICAL DISCONTINUITY OF 10 s.

490

FOR 3 DIRECTIONS. (MIL-STD-1344 2004,CONDITION E) ② NO DAMAGE, CRACK AND LOOSENESS OF PARTS.

ENVIRONMENTAL CHARACTERISTICS

RAPID CHANGE OF TEMPERATURE TEMPERATURE -55→ R/T⁽¹⁾→ +85 → R/T ℃

TIME 30 → 2 TO 3 → 30 → 2 TO 3 min

UNDER 5 CYCLES.

① INSULATION RESISTANCE: 500 MΩ MIN.

② NO DAMAGE, CRACK AND LOOSENESS OF PARTS.

DAMP HEAT

EXPOSED AT 71 ℃, 95 ％, 336 h. (MIL-C-5015 4.6.10)

① INSULATION RESISTANCE: 50 MΩ MIN

(AT HIGH HUMIDITY).

(STEADY STATE)

② INSULATION RESISTANCE: 500MΩ MIN (AT DRY).

③ NO DAMAGE, CRACK AND LOOSENESS OF PARTS.

(2)

SEALING

EXPOSED AT A DEPTH OF 1 m FOR 0.5 h.

(JIS B 6015) NO WATER PENETRATION INSIDE CONNECTOR.

―

(2)

AIRTIGHTNESS

APPLY AIR PRESSURE 40 kPa FOR 30 SEC TO INSIDE

CONNECTOR.

NO AIR BUBBLES FROM CONNECTOR INTERFACE.

(2)

OIL RESISTING

DROP CUTTING OIL FOR 48 HOURS AT THE RATE OF 0.5L

NO OIL SEEPAGE INSIDE CONNECTOR.

―

EVERY HOUR.

(JIS B 6015)

RESISTANCE TO SOLDERING

HEAT

PLACE SOLDERING IRON (IRON TIP TEMPERATURE ＋380±

10℃ )AND SOLDER TO SOLDERING POT AREA FOR 3 TO 4 s.

NO DEFORMATION OF CASE AND EXCESSIVE LOOSENESS

OF THE TERMINALS.

SOLDERABILITY

PLACE SOLDERING IRON (IRON TIP TEMPERATURE ＋350±

10℃ )AND SOLDER TO SOLDERING POT AREA FOR 2 TO 3 s.

A SOLDERING SIDE IS TO BE WET WITH SOLDER.

AND, NO SMALL LUMP OF THE SOLDER.

NO HEAVY CORROSION RUINS THE FUNCTION.

CORROSION SALT MIST

EXPOSED IN 5% SALT WATER SPRAY FOR 48h.

(MIL-STD-1344 3001,CONDITION B)

EXPOSED AT + 85 ℃,96 h.

―

DRY HEAT

COLD

NO DAMAGE,CRACK AND LOOSENESS OF PARTS.

－

EXPOSED AT - 55 ℃,96 h.

COUNT

DESCRIPTION OF REVISIONS

DESIGNED

CHECKED

DATE

△

REMARK

APPROVED

CHECKED

DESIGNED

HY.KOBAYASHI

DS.MATSUNE

18.02.26

18.02.24

NOTES(1) R/T :ROOM TEMPERATURE

(2)SEALING, AIRTIGHTNESS AND OIL RESISTING SHALL BE TESTED UNDER MATED

CONDITION WITH AN APPLICABLE CONNECTOR.

DRAWN

AI.NISHIYAMA

18.02.22

Unless otherwise specified, refer to IEC 60512(JIS C5402).

Note QT:Qualification Test AT:Assurance Test X:Applicable Test

DRAWING NO.

ELC-117925-31-00

HR08D-12WPK-2S(31)

PART NO.

CODE NO.

SPECIFICATION SHEET

HIROSE ELECTRIC CO., LTD.

△

1/1

CL108-0281-0-31

FORM HD0011-2-1

中文翻译

下载PDF

与HR08D-12WPK-2S(31)相关器件

型号	品牌	获取价格	描述	数据表
HR08D-12WPM-10S	HRS	获取价格	Small, Waterproof, Push-On Bayonet Lock Connectors
HR08D-12WPM-10S(31)	HRS	获取价格	连接器类型:插头;额定电流:3.0 A;(AC)额定电压:AC 200.0 V;(DC)额
HR08D-12WPM-10SC	HRS	获取价格	Small, Waterproof, Push-On Bayonet Lock Connectors
HR08D-12WPM-10SC(31)	HRS	获取价格	连接器类型:插头;额定电流:3.0 A;(AC)额定电压:AC 200.0 V;(DC)额
HR08D-12WPM-2S	HRS	获取价格	Small, Waterproof, Push-On Bayonet Lock Connectors
HR08D-12WPM-2S(31)	HRS	获取价格	连接器类型:插头;额定电流:3.0 A;(AC)额定电压:AC 200.0 V;(DC)额
HR08D-12WPN-10S	HRS	获取价格	Small, Waterproof, Push-On Bayonet Lock Connectors
HR08D-12WPN-10S(31)	HRS	获取价格	连接器类型:插头;额定电流:3.0 A;PIN数:10;(Max.)使用温度范围:85 ℃
HR08D-12WPN-10SC	HRS	获取价格	Small, Waterproof, Push-On Bayonet Lock Connectors
HR08D-12WPN-10SC(31)	HRS	获取价格	连接器类型:插头;额定电流:3.0 A;PIN数:10;(Max.)使用温度范围:85 ℃

与HR08D-12WPK-2S(31)相关文章

解析光耦仿真器：升级光耦合器技术的必要性
2024-11-18

36
英伟达新一代Blackwell GPU过热问题致交付延迟
2024-11-18

28
国产厂商思特威CMOS图像传感器芯片单月出货超1亿颗，技术创新引领行业发展
2024-11-14

56
台积电5nm和3nm产能利用率达100%，半导体行业景气度持续攀升
2024-11-14

53

产品中心

服务支持

精选活动

关于我们

帮助中心

HR08D-12WPK-2S(31)

HR08D-12WPK-2S(31) 数据手册

与HR08D-12WPK-2S(31)相关器件

与HR08D-12WPK-2S(31)相关文章

您还可以找

产品中心

服务支持

精选活动

关于我们

帮助中心

HR08D-12WPK-2S(31)

HR08D-12WPK-2S(31) 数据手册

与HR08D-12WPK-2S(31)相关器件

与HR08D-12WPK-2S(31)相关文章

您还可以找

您在本页遇到什么问题？