Datasheet > HR08D-12WR-10P(31)

HR08D-12WR-10P(31)

更新时间： 2024-10-15 18:09:39

品牌	Logo	应用领域
广濑 - HRS		插座连接器
页数	文件大小	规格书
1页	70K
描述
连接器类型:插座;额定电流:3.0 A;(AC)额定电压:AC 200.0 V;(DC)额定电压:DC 250.0 V;PIN数:10;(Max.)使用温度范围:85 ℃;(Min.)使用温度范围

阅读下载

中文翻译

获取价格

数据手册
替代型号

如果您发现信息不准确，欢迎纠错

HR08D-12WR-10P(31) 数据手册

APPLICABLE STANDARD

-20 C TO +85 C

AC 200 V , DC 250 V

3 A

-20 C TO +85 C

RATING

OPERATING TEMPERATURE RANGE

STORAGE TEMPERATURE RANGE

APPLICABLE CABLE

VOLTAGE

CURRENT

SPECIFICATIONS

TEST METHOD

ITEM

REQUIREMENTS

QT AT

CONSTRUCTION

GENERAL EXAMINATION

MARKING

VISUALLY AND BY MEASURING INSTRUMENT.

CONFIRMED VISUALLY.

ACCORDING TO DRAWING.

ELECTRIC CHARACTERISTICS

20 m MAX.

CONTACT RESISTANCE

CONTACT SHALL BE MEASURED AT DC 1 A (MIL-C-2316)

1000

M MIN.

INSULATION RESISTANCE

DC 500 V DC. (MIL-STD-1344 3003)

VOLTAGE PROOF

AC 900 V AC FOR 1 min. (MIL-STD-1344 3001)

NO FLASHOVER OR BREAKDOWN.

MECHANICAL CHARACTERISTICS

CONNECTOR INSERTION AND

MEASURED BY APPLICABLE CONNECTOR.

INSERTION FORCE : 70 N MAX.

WITHDRAWAL FORCE : 50 N MAX.

LOCKING DEVICE WITH UNLOCK

―

WITHDRAWAL FORCES

CONTACT RESISTANCE

m MAX.

MECHANICAL OPERATION

VIBRATION

500 TIMES INSERTIONS AND EXTRACTIONS.

(MIL-C-5015 4.6.12.2)

―

① NO ELECTRICAL DISCONTINUITY OF 10 s.

FREQUENCY 10 TO 500 Hz, SINGLE AMPLITUDE 0.75 mm,

98 m/s²AT 3 h, FOR 3 DIRECTIONS.

② NO DAMAGE, CRACK AND LOOSENESS OF PARTS.

(MIL-STD-1344 2005,CONDITIONⅡ)

m/s²

DIRECTIONS OF PULSE 11ms AT 3 TIMES

―

① NO ELECTRICAL DISCONTINUITY OF 10 s.

SHOCK

490

FOR 3 DIRECTIONS. (MIL-STD-1344 2004,CONDITION E) ② NO DAMAGE, CRACK AND LOOSENESS OF PARTS.

ENVIRONMENTAL CHARACTERISTICS

RAPID CHANGE OF TEMPERATURE

TEMPERATURE -55→ R/T⁽¹⁾→ +85 → R/T ℃

① INSULATION RESISTANCE: 500 MΩ MIN.

―

TIME 30 → 2 TO 3 → 30 → 2 TO 3 min

② NO DAMAGE, CRACK AND LOOSENESS OF PARTS.

UNDER 5 CYCLES.

(MIL-C-5015 4.6.4)

DAMP HEAT

EXPOSED AT 71 ℃, 95 ％, 336 h. (MIL-C-5015 4.6.10)

① INSULATION RESISTANCE: 50 MΩ MIN

(AT HIGH HUMIDITY).

(STEADY STATE)

② INSULATION RESISTANCE: 500MΩ MIN (AT DRY).

③ NO DAMAGE, CRACK AND LOOSENESS OF PARTS.

SEALING

EXPOSED AT A DEPTH OF 1 m FOR 0.5 h.

(JIS B 6015) NO WATER PENETRATION INSIDE CONNECTOR.

―

AIRTIGHTNESS(1)

APPLY AIR PRESSURE 40 kPa FOR 30 SEC TO INSIDE

CONNECTOR.(MATING CONDITION)

NO AIR BUBBLES FROM CONNECTOR INTERFACE.

NO OIL SEEPAGE INSIDE CONNECTOR.

AIRTIGHTNESS(2)

OIL RESISTING

APPLY AIR PRESSURE 17.6 kPa FOR 30 SEC TO INSIDE

CONNECTOR.(UNMATING CONDITON)

―

DROP CUTTING OIL FOR 48 HOURS AT THE RATE OF 0.5L

EVERY HOUR.

(JIS B 6015)

RESISTANCE TO SOLDERING

HEAT

PLACE SOLDERING IRON (IRON TIP TEMPERATURE ＋380±

10℃ )AND SOLDER TO SOLDERING POT AREA FOR 3 TO 4 s.

NO DEFORMATION OF CASE AND EXCESSIVE LOOSENESS

OF THE TERMINALS.

SOLDERABILITY

PLACE SOLDERING IRON (IRON TIP TEMPERATURE ＋350±

10℃ )AND SOLDER TO SOLDERING POT AREA FOR 2 TO 3 s.

A SOLDERING SIDE IS TO BE WET WITH SOLDER.

AND, NO SMALL LUMP OF THE SOLDER.

―

CORROSION SALT MIST

EXPOSED IN 5% SALT WATER SPRAY FOR 48h.

(MIL-STD-1344 3001,CONDITION B)

EXPOSED AT + 85 ℃,96 h.

NO HEAVY CORROSION RUINS THE FUNCTION.

DRY HEAT

COLD

NO DAMAGE,CRACK AND LOOSENESS OF PARTS.

－

EXPOSED AT - 55 ℃,96 h.

COUNT

DESCRIPTION OF REVISIONS

DESIGNED

CHECKED

DATE

△

REMARK

APPROVED

CHECKED

DESIGNED

DRAWN

HY.KOBAYASHI

DS.MATSUNE

18.02.26

18.02.24

18.02.16

NOTE(1) R/T :ROOM TEMPERATURE

Unless otherwise specified, refer to IEC 60512(JIS C5402).

AI.NISHIYAMA

Note QT:Qualification Test AT:Assurance Test X:Applicable Test

DRAWING NO.

PART NO.

CODE NO.

ELC-115623-31-00

HR08D-12WR-10P(31)

SPECIFICATION SHEET

HIROSE ELECTRIC CO., LTD.

△

1/1

CL108-0218-4-31

FORM HD0011-2-1

中文翻译

下载PDF

HR08D-12WR-10P(31) 替代型号

型号	品牌	替代类型	描述	数据表
HR08D-12WR-10P	HRS	功能相似	Small, Waterproof, Push-On Bayonet Lock Connectors

与HR08D-12WR-10P(31)相关器件

型号	品牌	获取价格	描述	数据表
HR09304000J0G	AMPHENOL	获取价格	Barrier Strip Terminal Block
HR09308000J0G	AMPHENOL	获取价格	Barrier Strip Terminal Block
HR09308100J0G	AMPHENOL	获取价格	Barrier Strip Terminal Block
HR09309100J0G	AMPHENOL	获取价格	Barrier Strip Terminal Block
HR09400000J0G	AMPHENOL	获取价格	Barrier Strip Terminal Block
HR09405100J0G	AMPHENOL	获取价格	Barrier Strip Terminal Block
HR09406100J0G	AMPHENOL	获取价格	Barrier Strip Terminal Block
HR09408100J0G	AMPHENOL	获取价格	Barrier Strip Terminal Block
HR09409100J0G	AMPHENOL	获取价格	Barrier Strip Terminal Block
HR09502100J0G	AMPHENOL	获取价格	Barrier Strip Terminal Block

与HR08D-12WR-10P(31)相关文章

意法半导体发布第四代SiC技术，助力电动汽车电驱
2024-10-15

8
联发科推出全球首款3纳米汽车芯片CT-X1，挑战高通SA8295
2024-10-15

13
国家大基金减持三家半导体企业，市场反应各异
2024-10-15

13
晶圆厂易主：Coherent公司2000万英镑出售苹果供应链关键资产
2024-10-08

36

产品中心

服务支持

精选活动

关于我们

帮助中心

HR08D-12WR-10P(31)

HR08D-12WR-10P(31) 数据手册

HR08D-12WR-10P(31) 替代型号

与HR08D-12WR-10P(31)相关器件

与HR08D-12WR-10P(31)相关文章

您还可以找

产品中心

服务支持

精选活动

关于我们

帮助中心

HR08D-12WR-10P(31)

HR08D-12WR-10P(31) 数据手册

HR08D-12WR-10P(31) 替代型号

与HR08D-12WR-10P(31)相关器件

与HR08D-12WR-10P(31)相关文章

您还可以找

您在本页遇到什么问题？