APPLICABLE STANDARD
-25 C TO +85 C
AC 200 V , DC 250 V
3 A
-25 C TO +85 C
(φ6.5 TO φ7.3)
RATING
OPERATING TEMPERATURE RANGE
STORAGE TEMPERATURE RANGE
APPLICABLE CABLE
VOLTAGE
CURRENT
SPECIFICATIONS
TEST METHOD
ITEM
REQUIREMENTS
QT AT
CONSTRUCTION
GENERAL EXAMINATION
MARKING
VISUALLY AND BY MEASURING INSTRUMENT.
CONFIRMED VISUALLY.
ACCORDING TO DRAWING.
×
×
×
×
ELECTRIC CHARACTERISTICS
20 m MAX.
CONTACT RESISTANCE
CONTACT SHALL BE MEASURED AT DC 1 A (MIL-C-2316)
×
×
×
×
1000
M MIN.
INSULATION RESISTANCE
500 V DC. (MIL-STD-1344 3003)
VOLTAGE PROOF
1500 V AC FOR 1 min. (MIL-STD-1344 3001)
NO FLASHOVER OR BREAKDOWN.
×
×
MECHANICAL CHARACTERISTICS
0
×
―
CONTACT INSERTION AND
φ0.736
BY STEEL GAUGE.
INSERTION AND WITHDRAWAL FORCES : 0.2 N MIN.
-0.003
WITHDRAWAL FORCES
CONNECTOR INSERTION AND
WITHDRAWAL FORCES
MEASURED BY APPLICABLE CONNECTOR.
INSERTION AND WITHDRAWAL FORCE : 50 N MAX.
LOCKING DEVICE WITH UNLOCK
×
×
×
―
―
―
CONTACT RESISTANCE :
30
m MAX.
MECHANICAL OPERATION
500 TIMES INSERTIONS AND EXTRACTIONS.
(MIL-C-5015 4.6.12.2)
① NO ELECTRICAL DISCONTINUITY OF 10 s.
② NO DAMAGE, CRACK AND LOOSENESS OF PARTS.
VIBRATION
SHOCK
FREQUENCY 10 TO 500 Hz, SINGLE AMPLITUDE 0.75 mm,
98 m/s2 AT 3 h, FOR 3 DIRECTIONS.
(MIL-STD-1344 2005,CONDITIONⅡ)
m/s2
DURATIONS OF PULSE 11ms AT 3 TIMES
×
×
×
―
―
―
① NO ELECTRICAL DISCONTINUITY OF 10 s.
490
FOR 3 DIRECTIONS. (MIL-STD-1344 2004,CONDITION E) ② NO DAMAGE, CRACK AND LOOSENESS OF PARTS.
ENVIRONMENTAL CHARACTERISTICS
RAPID CHANGE OF TEMPERATURE TEMPERATURE -55→ R/T(1) → +85 → R/T ℃
① INSULATION RESISTANCE: 500 MΩ MIN.
TIME 30 → 2 TO 3 → 30 → 2 TO 3 min
② NO DAMAGE, CRACK AND LOOSENESS OF PARTS.
UNDER 5 CYCLES.
(MIL-C-5015 4.6.4)
DAMP HEAT
EXPOSED AT 71 ℃, 95 ％, 336 h. (MIL-C-5015 4.6.10)
① INSULATION RESISTANCE: 50 MΩ MIN
(AT HIGH HUMIDITY).
(STEADY STATE)
② INSULATION RESISTANCE: 500MΩ MIN (AT DRY).
③ NO DAMAGE, CRACK AND LOOSENESS OF PARTS.
(2)
SEALING
EXPOSED AT A DEPTH OF 1 m FOR 0.5 h.
(JIS B 6015) NO WATER PENETRATION INSIDE CONNECTOR.
×
×
―
―
(2)
AIRTIGHTNESS
APPLY AIR PRESSURE 40 kPa FOR 30 SEC TO INSIDE
CONNECTOR.
NO AIR BUBBLES FROM CONNECTOR INTERFACE.
(2)
OIL RESISTING
DROP CUTTING OIL FOR 48 HOURS AT THE RATE OF 0.5L
NO OIL SEEPAGE INSIDE CONNECTOR.
×
×
×
―
―
―
EVERY HOUR.
(JIS B 6015)
RESISTANCE TO SOLDERING
HEAT
PLACE SOLDERING IRON (IRON TIP TEMPERATURE ＋380±
10℃ )AND SOLDER TO SOLDERING POT AREA FOR 3 TO 4 s.
NO DEFORMATION OF CASE AND EXCESSIVE LOOSENESS
OF THE TERMINALS.
SOLDERABILITY
PLACE SOLDERING IRON (IRON TIP TEMPERATURE ＋350±
10℃ )AND SOLDER TO SOLDERING POT AREA FOR 2 TO 3 s.
A SOLDERING SIDE IS TO BE WET WITH SOLDER.
AND, NO SMALL LUMP OF THE SOLDER.
NO HEAVY CORROSION RUINS THE FUNCTION.
CORROSION SALT MIST
EXPOSED IN 5% SALT WATER SPRAY FOR 48h.
(MIL-STD-1344 3001,CONDITION B)
EXPOSED AT + 85 ℃,96 h.
×
―
DRY HEAT
COLD
NO DAMAGE,CRACK AND LOOSENESS OF PARTS.
NO DAMAGE,CRACK AND LOOSENESS OF PARTS.
X
X
－
－
EXPOSED AT - 55 ℃,96 h.
COUNT
DESCRIPTION OF REVISIONS
DESIGNED
CHECKED
DATE
△
0
REMARK
APPROVED
CHECKED
DESIGNED
HY.KOBAYASHI
HY.KOBAYASHI
DS.MATSUNE
18.02.26
18.02.26
18.02.24
NOTES(1) R/T :ROOM TEMPERATURE
(2)SEALING, AIRTIGHTNESS AND OIL RESISTING SHALL BE TESTED UNDER MATED
CONDITION WITH AN APPLICABLE CONNECTOR.
DRAWN
AI.NISHIYAMA
18.02.16
Unless otherwise specified, refer to IEC 60512(JIS C5402).
Note QT:Qualification Test AT:Assurance Test X:Applicable Test
DRAWING NO.
ELC-117660-31-00
HR08D-12WPN-2S(31)
PART NO.
CODE NO.
SPECIFICATION SHEET
HIROSE ELECTRIC CO., LTD.
0
△
1/1
CL108-0266-7-31
FORM HD0011-2-1
5秒后页面跳转
SL74HC10N：高性能三输入与非门解析
AIC1781A 电池充电控制器深度解析
Pickering新高压舌簧继电器亮相汽车测试博览会
采用MCU+MPU双处理器架构实现的创新应用设计探索
微信公众号
抖音公众号
浙公网安备 33010502006866号 浙ICP备10014259号-119
营业执照ICP证
数据手册
如果您发现信息不准确，
