Ultra-Precision Resistor
(
)
Hermetically Sealed
TCR, Resistance Range, Tolerance, Rated Power
HC
TCR (ppm/°C) Resistance
Rated Power (W)
at 125°C
Resistance Tolerance (%)*
Type
HD
-55°C to +125°C
Range(⍀)
HG
1 to 5
±
±
0.5 (D) ±1 (F)
0±15 (W)
5 to 30
0.1 (B) ±0.5 (D) ±1 (F)
0±5 (X)
0±5 (X)
0±2.5 (Y)
0±1 (Z)**
HC
HD
0.3
±
±
±
0.005 (V) ±0.01 (T)
0.02 (Q) ±0.05 (A)
0.1 (B) ±0.5 (D) ±1 (F)
30 to 120k
1 to 10
±
±
0.01 (T) ±0.02 (Q) ±0.05 (A)
0.1 (B) ±0.5 (D) ±1 (F)
0±2.5 (Y)
0±1 (Z)**
0.3
HG
±
±
±
0.005 (V) ±0.01 (T)
0.02 (Q) ±0.05 (A)
0.1 (B) ±0.5 (D) ±1 (F)
10 to 10k
Symbols in parentheses are for type number composition.
*Resistance figures are obtained by measuring the leads at point 12.7±3.2mm away from the base for type HC
and HD, but, in case of resistance below 10 ohm, the value at 1.6±0.6mm away from the base for all types.
**Temperature characteristic Z is applicable for temperature range between 0°C and 60°C.
Composition of Type Number
Power Derating Curve
HC Y 30K000 T
(%)
250
200
150
100
Resistance value, in ohm, is expressed by a series of six characters, five of
which represent significant digits. The sixth R or K is a dual-purpose letter that
designates both the value range (R for ohmic; K for kilo-ohm) and the location
of decimal point.
Configuration
50
70
25
50
75
100
125
150 (°C)
Ambient Temperature
HC, HD Type
HG Type
Four-Terminal (Kelvin) Connection
For low ohmic resistor (less than 10 ohm), the resistance value and TCR of the
copper lead increases overall resistance value. Four-terminal (Kelvin) connection
is recommended per the following figure. Loading current at voltage and current
terminals (V, I) causes measurement error.
Four-Terminal Resistor
Type
L
HC
HD
HG
10.7±0.3
19.0±0.3
12.8±0.3
8.8±0.3
W
T
10.7±0.3
4.3±0.3
F
3.81±0.25
5.08±0.25
2.54±0.25
5.08±0.25
F1
30±10
d
0.65±0.05
0.8±0.05
d1
Dimensions in mm
28