®
HA-2500/883
Precision High Slew Rate Operational Amplifier
September 2004
Features
Des cription
• This Circuit is Processed in Accordance to MIL-STD-
883 and is Fully Conformant Under the Provisions of
Paragraph 1.2.1.
HA-2500/883 is a monolithic operational amplifier which is
optimized to deliver excellent slew rate, bandwidth, and set-
tling time specifications. The outstanding dynamic features
of this internally compensated device are complemented
with low offset voltage and offset current.
• High Slew Rate. . . . . . . . . . . . . . . . . . . . . . .25V/µs (Min)
30V/µs (Typ)
This dielectrically isolated amplifier is ideally suited for appli-
cations such as data acquisition, RF, video, and pulse condi-
tioning circuits. Guaranteed slew rates of ±25V/µs minimum
make it an excellent component in fast, accurate data acqui-
sition and pulse amplification designs. To insure compliance,
all devices are 100% tested for AC performance characteris-
tics over the full temperature limits.
• Wide Power Bandwidth . . . . . . . . . . . . . . . 350kHz (Min)
• High Input Impedance . . . . . . . . . . . . . . . . . 25MΩ (Min)
50MΩ (Typ)
• Low Offset Current . . . . . . . . . . . . . . . . . . . 25nA (Max)
10nA (Typ)
• Low Quiescent Current . . . . . . . . . . . . . . . . . 6mA (Max)
• Fast Settling Time (0.1% of 10V Step) . . . . 330ns (Typ)
• High Gain Bandwidth Product . . . . . . . . . 12MHz (Typ)
• Internally Compensated For Unity Gain Stability
A typical 12MHz gain bandwidth product and 500kHz full
power bandwidth make this device well suited to RF and
video applications. With guaranteed offset voltages of 5mV
plus external offset adjust flexibility and low offset current,
this amplifier is particularly useful in signal conditioning
designs.
Applications
Part Number Information
• Data Acquisition Systems
• RF Amplifiers
TEMP.
PKG.
NO.
o
PART NUMBER RANGE ( C)
PACKAGE
8 Pin Can
HA2-2500/883 -55 to 125
T8.C
• Video Amplifiers
• Signal Generators
• Pulse Amplification
Pinout
HA-2500/883
(METAL CAN)
TOP VIEW
COMP
8
BAL
1
7
5
V+
6
-
-IN
2
OUT
+
BAL
3
+IN
4
V-
CAUTION: These devices are sensitive to electrostatic discharge; follow proper IC Handling Procedures.
1-888-INTERSIL or 321-724-7143 | Intersil (and design) is a registered trademark of Intersil Americas Inc.
Spec Number 511002-883
Copyright © Intersil Americas Inc. 2002, 2004. All Rights Reserved
1
FN3734.3